Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wil
June 16, 2023
When door is opened it starts to run. closing the door shuts it off. tried cancel button didn't help. It did this for several tries. then after a while it worked okay. Now it's back to running with door open again. It seems to work and heat food ok. Is there any danger running this oven? I tried shutting off the breaker to reset but didn't help the situation.
For model number PEM31EF2ES
Hi Wil, thank you for reaching out. Based on the description that you have provided, we would recommend checking the door interlock switch, part number PS8753558, to fix this issue. We hope this solves your problem!
Slide a Butter knife at left side by open push knob door will open. Then open all screws from top cover push cover top side front way then door locks Bracket have 3 microswitch pulls out switches mark them top medium and bottom. Remove 3 screws holding brackets will come out. On bottom see a Cam has 1/4” holes can holding Saft broken then
... Read more install new door lock bracket install microswitch put 3screw and slide Cam on saft . I put a small screw on saft to hold cam on place. There was no screw . That’s why cam saft was broke. Put top cover tight all the screws and door lock fixed.
I used small wire cutter I use in fly tying hobby. The metal was easy to cut. When cover was removed I unplugged the motor,removed it and plugged the new one in. To replace the cover -- reverse it,place the 2 tabs on one edge into the slots that are already part of the base. On the opposite edge there is a domed shaped tab with a h
... Read moreole in center. Place the small screw that was provided back in and thighten. Your Done