Models
>
PEB9159DJ2WW
PEB9159DJ2WW General Electric Microwave - Overview
Sections of the PEB9159DJ2WW
[Viewing 4 of 4]Keep searches simple, eg. "belt" or "pump".
Microwave Fuse
PartSelect #: PS3486694
Manufacturer #: WB27X11138
This fuse is for microwaves. Fuse protects the microwave from damage by shutting off the microwave if there's a power surge.
$57.94
In Stock
Microwave Glass Turntable Tray
PartSelect #: PS3486810
Manufacturer #: WB39X10032
This turntable tray is for microwaves.
Turntable tray rotates in the center of the microwave to help ensure the food cooks evenly.
Follow the instructions in the owner's manual when installing this part.
$149.53
In Stock
Microwave Door Interlock Switch Bracket
PartSelect #: PS3486543
Manufacturer #: WB14X10049
The door interlock switch bracket houses and supports the door switches.
$40.70
In Stock
Microwave Turntable Motor
PartSelect #: PS12722592
Manufacturer #: WB26X32190
This turntable motor is for microwaves.
The turntable motor rotates the glass tray inside the microwave oven.
Because high-voltage capacitors in a microwave can retain a lethal electrical charge...
$114.20
In Stock
Microwave Turntable Motor Coupler
PartSelect #: PS8753744
Manufacturer #: WB06X10925
The turntable motor coupler connects the turntable motor to the turntable tray to rotate the tray.
$39.29
In Stock
Microwave Electronic Control Board
PartSelect #: PS12295369
Manufacturer #: WB27X29822
$197.50
In Stock
Questions And Answers for PEB9159DJ2WW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
BRENDA
October 27, 2022
KEY PAD NUMBERS DON'T WORK
For model number PEB9159DJ2WW
Hi Brenda,
Thank you for your question. Sometimes using a hair dryer on low heat over the buttons as you press them may get them to work again. If not there may be a film built up on the ribbon cable preventing it from working correctly. You can use a pencil eraser to gently remove the film from it. If these 2 methods do not work, you will need to replace the control panel assembly. The part number listed under your model number for the control panel assembly is PS12295760. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Common Symptoms of the PEB9159DJ2WW
[Viewing 3 of 3]Won’t turn on
Fixed by
these parts
these parts
Show All
Door stuck closed
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Microwave door was hard to open
1. Take out the case by unscrew 8 screws on the back and side of the case
2. Take out the control panel by unscrew 1 screw on the top and slide up
3. Take out the latch by unscrew 2 screws, and slide out 3 electric switches that clipped on the latch
4. Clip the switches onto the new latch
5. Slide in lever switch into ... Read more latch
6. Put back the latch
7. Put back the control panel
8. Put back the case
2. Take out the control panel by unscrew 1 screw on the top and slide up
3. Take out the latch by unscrew 2 screws, and slide out 3 electric switches that clipped on the latch
4. Clip the switches onto the new latch
5. Slide in lever switch into ... Read more latch
6. Put back the latch
7. Put back the control panel
8. Put back the case
Read less
Parts Used:
-
Henry from NORWALK, CT
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door locks. Not opening.
Slide a Butter knife at left side by open push knob door will open. Then open all screws from top cover push cover top side front way then door locks Bracket have 3 microswitch pulls out switches mark them top medium and bottom. Remove 3 screws holding brackets will come out. On bottom see a Cam has 1/4” holes can holding Saft broken then
... Read more
install new door lock bracket install microswitch put 3screw and slide Cam on saft . I put a small screw on saft to hold cam on place. There was no screw . That’s why cam saft was broke. Put top cover tight all the screws and door lock fixed.
Read less
Parts Used:
-
Jay from WESLEY CHAPEL, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Installed waveguide
-
Jason from KIRKLAND, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!