This is a turntable drive motor for a microwave. It measures approximately 2 inches in diameter and is made mostly of metal. Located under the microwave turntable, also known as a microwave plate, it rotates the plate while the appliance is in use so your food items are heated equally and efficiently. If your plate will not turn or is noi...Read moresy, you may need to replace the drive motor. This part is sold separately, and does not include parts such as the turntable coupling or plate. This is an authentic replacement part sourced from the original manufacturer.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Noel - For model number PCOR30S
November 27, 2024
I am missing piece of the door facade : chrome rectangle 2and 1/2” high by 21and 1/2” long that had attached by some sticky stuff to the door. It’s gone missing and I need a replacement
Hi Noel,
Thank you for your question. The part you are looking for is sold with the door assembly. The part number for the door assembly is PS17566396. We hope this helps!
My microwave is circling vent system. Does this model have a charcoal filter anywhere?
Hello Joan, Thank you for writing. The Charcoal Filter for this model is listed as PartSelect #: PS16631827. We hope this helps, good luck with the repair!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Turn table motor
2 of 4 peoplefound this instruction helpful.
barb from dana point, CA
Easy
30 - 60 mins
Pliers, Screw drivers
Just take out the appliance from built in frame, if any, remove the glass turn table, disassemble the metal cover (no-tamper screws were a problem), flip it over, unscrew one screw from the motor, unplug the wires (keep track of the connections), install the new motor and wires, reaassemble with regular screws, and reinstall. No big deal.