EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

PCB969DP2WW General Electric Range - Instructions

All Instructions for the PCB969DP2WW
61 - 75 of 103

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Not Reaching Temperature above 300 Degrees
1 person found this instruction helpful.
  • Ron from SAN TAN VLY, AZ
  • Very Easy
  • Less than 15 mins
  • Nutdriver
Take off 6 screws of back cover of the range, unplug the white wire. Go to the inside of oven, pull out racks. At the top of the oven is your Broiler element, in the center you will see a rod sticking out with one screw holding it in place. Take out screw and pull temperature sensor out toward you. Reverse steps to put it back together.
Was this helpful?
Thank you for voting!
Replaced oven door gasket
1 person found this instruction helpful.
  • Paul from JACKSONVILLE, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Remove old stained gasket and replaced with new. Only $57.00!
Was this helpful?
Thank you for voting!
Loss of the two center burners
1 person found this instruction helpful.
  • Christopher from CLATSKANIE, OR
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
Removed the two sheet metal screws securing the range top after disconnecting the power. Removed the mounting clips to the old range element and installed the new one. It was an easy fix.
Was this helpful?
Thank you for voting!
Replacing handle spacer
1 person found this instruction helpful.
  • Sherry from SAINT PAUL, MN
  • Easy
  • Less than 15 mins
  • Screw drivers
This one is simple. unscrew a portion of the door, install the spacer and screw back together. Worked well.
Was this helpful?
Thank you for voting!
Temp probe was defective
1 person found this instruction helpful.
  • Eric from SOUTHBURY, CT
  • Very Easy
  • Less than 15 mins
Threw the old one out - plugged the new one in. Steak came out just as ordered - medium rare.
Was this helpful?
Thank you for voting!
My large burner on my glass top range quit working
1 person found this instruction helpful.
  • Jeanne from CHEHALIS, WA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
First I found a u-tube video on how to repair this. I found the model number of my stove and used my phone to take a picture of it. I found the part on part select.com and ordered it. It came within a few days.
Turn off electricity to the stove. There were two screws to loosen and allow me to lift the glass stove top. It did not come off and we made a stick to hold it open. Then we unplugged and removed the old burner paying attention what was plug in where, maybe 4 plug ins. Then we clipped it back in, closed the top, rescrewed the top on. Turned on the electricity. It took 10 minutes to replace. Very easy!
Was this helpful?
Thank you for voting!
oven door gasket needed replaced
1 person found this instruction helpful.
  • Mary from LONGS, SC
  • Very Easy
  • Less than 15 mins
Ordered the part, it arrived and 5 minutes later it a complete installation
Was this helpful?
Thank you for voting!
Knob stem broke off.
1 of 2 people found this instruction helpful.
  • DALE from FREMONT, NE
  • Very Easy
  • Less than 15 mins
  • Nutdriver, Pliers, Screw drivers
Pulled stove out to access back panel. Unscrew broken switch/stem. Replaced each wire one at a time to make sure they went in right spot. Screw in new switch. Replaced back panel.
Was this helpful?
Thank you for voting!
oven was not getting up to temp
0 of 1 people found this instruction helpful.
  • walter from townshend, VT
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Once I opened up the back of the range, the sensor wires where there and burnt just like your info said. One nut to take off in the oven and the sensor came right out and the new one went right in. The oven works great, cooked the turkey today. The worst part of the repare was the cleaning behind and under the range, it hasn't moved since it was put in 6 years ago. Very pleased with PS.
Was this helpful?
Thank you for voting!
Broken Probe Sensor
0 of 1 people found this instruction helpful.
  • Michael from Tucson, AZ
  • Really Easy
  • Less than 15 mins
Replaced it
Was this helpful?
Thank you for voting!
F2 error when oven was heating up, along with a beeping noise and then it shut off
0 of 1 people found this instruction helpful.
  • Lori from Paris, TN
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Unplugged oven, turned off breaker, took cover off back of oven, removed old sensor by disconnecting in back of oven and undoing screw inside oven. Pulled old one out replaced with new took 15min. Cost me less than $20. Parts Select rocks! Even received part in two days with standard shipping!
Was this helpful?
Thank you for voting!
F2 error code
0 of 2 people found this instruction helpful.
  • jud from gatesville, TX
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Really easy fix. Unplug oven. With a 5/16 nut driver take the 5 screws out of the center long tin cover and remove. Unplug little white temperature sensor plug located between broil heating element. Open oven door and remove one screw holding temp. sensor using same nut driver and simply pull out old sensor. Install new sensor. It's tha t easy. No more f2 been working like a champ!!!
Was this helpful?
Thank you for voting!
oven not warming, f2 indicating overheat
  • David from Lisle, IL
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Removed 4 screws from back panel, disconnected small electricsl connector from sensor, removed one mounting screw from sensor inside oven,pulled wires through and removed old sensor. Fed wires for new sensor through and connected electrical connector, installed panel, installed mounting screw on sensor and checked oven, worked like a cham p. Took 5 minutes.
Was this helpful?
Thank you for voting!
Old Element Cotrols were sparking due some type of Electrical Short
  • Steven from Boerne, TX
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Unplugged the stove, removed the back control cover, removed the Element Control Knob on front, removed the two screws holding the control in place, pull one wire of old control and connected to the new control - one at a time to ensure proper placement, re-attached the screws, control knob, back cover, plugged in stove, and repairs were completed in less then 15 minutes for both controls.
Was this helpful?
Thank you for voting!
3 of 4 Oven Lamps burnt out
  • Dave from Woodbine, MD
  • Easy
  • Less than 15 mins
Remove the glass cover to the halogen lamp fixture (counter clockwise turn, about a 1/4 turn). Recommend use of rubber coated gloves as the glass covers do not offer much by way of a good grip. Gently remove the halogen lamp (bulb) and insert new bulb into socket. Since the oven door is open, the lamp will light up indicating successful installation. Replace the glass cover (clockwise turn) until secure. Pitch the burnt out halogen lamp in the trash.
Was this helpful?
Thank you for voting!
All Instructions for the PCB969DP2WW
61 - 75 of 103