My Orders
PB-SE801 Tanaka - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bulb was worn out and broken open
17 of 21 people
found this instruction helpful.
-
Richard from SPRING HILL, FL
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
The unit is a press fit. To remove the old one required breaking the plastic compression tabs that hold it in place. That was simple enough. Replacing requires lining up in the correct position to meet the inner hose. Then push it in. The compression tabs on the replacement click in and hold.in place.
Was this helpful?
Thank you for voting!
Gas-powered scooter would not run
2 of 3 people
found this instruction helpful.
-
David from SACRAMENTO, CA
- A Bit Difficult
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Replaced coil-ignition
Was this helpful?
Thank you for voting!