My Orders
P2132E (1696527-01) Simplicity Snow Blower - Overview
Diagrams for P2132E
See every part. Know exactly what you need.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$6.40
In Stock
Snow Blower Shear Pin
Part #703063
Shear Pins are designed to break off in order to prevent further damage to your machine. Because they are designed to break, we recommend having a few spares on hand. This part is made of metal, is silver, is not part of a kit or assembly, and is sold individually.
A Shear Pin will break when you hit a large chunk or ice or other debris...Read more. Once it is broken, it will need to be replaced. You will need pliers to complete this repair.
Customers rate this repair as Easy.
Read less
$10.65
In Stock
Bearing, Ball 11/16x1
Part #1705897SM
This ball bearing is sourced from the original equipment manufacturer and can be used in a variety of outdoor equipment. It has an inner diameter of 11/16 inches. The ball bearing provides support for the rotating parts in your equipment and reduces the amount of friction they are subject to during use. If the bearing is not adequately lu...Read morebricated or has worn down, you may hear grinding or squeaking from your equipment and notice excessive vibration when in use. It is important to address this issue promptly as a faulty ball bearing can potentially damage the parts located near it. To replace the ball bearing, use a pry bar or bearing puller to pry it out of its housing. Clean the housing thoroughly and press your new ball bearing in position. Note that when pressing the ball bearing into place, apply force only to the outer portion of the bearing.
Read less
$14.76
In Stock
Snow Blower Greased Bearing
Part #2108202SM
This Ball Bearing is an individually sold, silver/black, metal part. It reduces friction in the spindle assembly between the spindle shaft and the spindle housing. If broken due to wear/fatigue, you will hear a grinding, growling, rumbling or screeching sound, and should replace the part. Refer to your make, model and diagrams to ensure this is the right part for you.
No Longer Available
Retainer
Part #7011938SM
An authentic high quality retainer that is supplied directly from original equipment manufacturer for use with Murray, Snapper and Simplicity snowblowers. This part is secured on the bottom of the chute assembly, it helps to secure it to the auger housing. It is a durable plastic item that is sold individually, please note the hardware to secure it is sold separately.
$60.22
In Stock
DISC, Friction with Insert
Part #1725428SM
Introducing the Simplicity Friction Disc. This critical component is designed to enhance the operation of your machine by providing robust frictional grip. Composed of high-quality materials, it offers longevity and exceptional handling with the additional friction ring and wheel. The efficient design of the Simplicity Friction Disc ensur...Read morees maximum wear resistance, enhancing overall machine performance and lifespan. Get optimal performance and reliable functionality with the Simplicity Friction Disc. Reinvent your equipment's efficiency today!
Read less
$8.19
In Stock
Lawn Mower Nut
Part #703409
This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.
Read less
$6.40
In Stock
Pin, 3/32 X 1.6
Part #703300
The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manufacturer. Most customers rated the replacement of the hair pin as an easy repair.
$10.20
In Stock
BUSHING, 377/100 ID x 1-13/100 OD x 1 LG, Powdered Metal
Part #1666001SM
This is an OEM bushing made for use with snow blowers and snow blower tractor attachments. Made of high-quality metal, this bushing is sold as an individual part and features a 0.75-inch inner-diameter. This bushing is normally attached to the axle and chassis to reduce friction and vibrations during operation and movement of your snow bl...Read moreower. If your snow blower is experiencing suspension issues and problems with stability, the bushing may need to be replaced. Check your user manual or diagrams for the best placement and attachment.?
Read less
$6.40
In Stock
Snow Blower Self Locking Cotter Pin
Part #7023590SM
This is an authentic manufacturer-sourced cotter pin. It is a standard hardware commonly used on a variety of Craftsman lawn and garden equipment. Depending on the model of your unit it will be used in different locations to secure two parts together. Please make sure to check appropriate diagrams for correct application for this part. Th...Read moreis high-quality cotter pin is made of durable metal and is sold individually. It is best to use pliers to remove or install this part.
Read less
$6.40
In Stock
Washer, 5/8
Part #703580
This 5/8 Washer is an OEM part that spreads load under a bolt or nut in a variety of different lawn equipment. This washer has an inside diameter of 0.625 inches, or 5/8. It is silver in color, made of metal, and sold individually. Over time, the washer may become damaged due to fatigue, and need to be replaced.
Depending on the locatio...Read moren of the bolt or nut it is associated with, this repair may vary in difficulty, but generally it should be easy and not require any special tools.
Read less
$103.46
In Stock
Wire Harness Adapter Kit, Chut
Part #1687904
It is a genuine item that is supplied by the original equipment manufacturer for use with Murray, Snapper and Simplicity snowthrowers. This is an identical replacement for a missing or a faulty switch that was originally installed on a new unit. It is the part that allows a user to turn on and off the chute rotation. Please make sure to r...Read moreefer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality plastic body switch is sold individually.
Read less
$6.40
In Stock
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More