OM08P7NWHF Gibson Microwave - Overview

Sections of the OM08P7NWHF

[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
White Touch up Paint – Part Number: 5303321319
White Touch up Paint
PartSelect #: PS467298
Manufacturer #: 5303321319
This is white touch up paint for refrigerators, microwaves, ranges, dryers, and freezers. It is used to cover, or touch up, nicks and scratches on the appliance from wear and tear. It is an 18ml bottl...
$11.99
  On Order
Glass Tray Drive Coupling – Part Number: 5303922044
Glass Tray Drive Coupling
PartSelect #: PS469578
Manufacturer #: 5303922044
This glass tray drive coupling is also known as a bushing, and it is designed for use with microwaves and microwave ovens. This is a genuine OEM replacement part. The bushing is located in the center ...
$64.48
  Special Order
Glass Cooking Tray – Part Number: 5303091188
Glass Cooking Tray
PartSelect #: PS454007
Manufacturer #: 5303091188
  No Longer Available
NUT – Part Number: 5303212803
NUT
PartSelect #: PS457503
Manufacturer #: 5303212803
This push-on nut can be used for a variety of household appliances. To find the exact location and proper application of this part, refer to your appliance manual. Push-on nuts, also known as push-on ...
  No Longer Available
Interlock Switch – Part Number: 5303203636
Interlock Switch
PartSelect #: PS454567
Manufacturer #: 5303203636
This part is used to stop the flow of electrical current when the door is opened to prevent any microwave energy escaping.
  No Longer Available
SCREW – Part Number: 5303300265
SCREW
PartSelect #: PS463003
Manufacturer #: 5303300265
$11.99
  In Stock
FUSE – Part Number: 5303011670
FUSE
PartSelect #: PS453357
Manufacturer #: 5303011670
  No Longer Available
MOTOR-TURNTABLE – Part Number: 317005505
MOTOR-TURNTABLE
PartSelect #: PS440414
Manufacturer #: 317005505
  No Longer Available
LAMP 40 W 120 V CLE – Part Number: 5303212801
LAMP 40 W 120 V CLE
PartSelect #: PS457501
Manufacturer #: 5303212801
$43.28
  Special Order
BEZEL-LATCH – Part Number: 5303212767
BEZEL-LATCH
PartSelect #: PS457478
Manufacturer #: 5303212767
$6.31
  Special Order
Drain Hose Clamp – Part Number: 216273000
Drain Hose Clamp
PartSelect #: PS425385
Manufacturer #: 216273000
$20.13
  Special Order
SPACER – Part Number: 5303203151
SPACER
PartSelect #: PS454538
Manufacturer #: 5303203151
$7.28
  Special Order

Questions And Answers for OM08P7NWHF

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Turn Table Was Unable To Turn To Heat Food Properly And Thoroughly
I pulled out the glass turn table tray and put the bushing in the little whole, in the center of the bottom (under turn table tray). Fixed the problem right away. Working wonderful! Was happy with how easy it was to locate part. Had received this microwave as a wedding gift, feb. 1994. Thought I was going to have to replace. Thanks to your website I was able to locate and purchase the part needed to fix the problem in less than 1 minute. I thanks you. I love this particular microwave!
Parts Used:
Glass Tray Drive Coupling
  • Wendy from Shermansdale, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Turntable motor was worn out - gears were slipping
The job was very simple, remove the bottom plate of the microwave which is four screws and it exposes the motor. There are two screws which hold the motor in place that you access from inside the unit. Remove the two screws being carefull not to lose the gasket that is in between the motor and the bottom of the unit. Set the new motor in place being sure to add the gasket to the new part and run the two screws to the new motor and tighten! It don't get any easier than that! Also do not forget to plug the motor back into the female socket before attaching the bottom plate!
Parts Used:
MOTOR-TURNTABLE
  • Chad from Roanoke, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!