Switch to Classic
Models > NED4655EW1

NED4655EW1 Amana Dryer - Overview

Sections of the NED4655EW1

[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Multi Rib Belt - 92-1/4" – Part Number: 341241
Multi Rib Belt - 92-1/4"
★★★★★
★★★★★
(331)
PartSelect #: PS346995
Manufacturer #: 341241
This dryer drum belt (Whirlpool Dryer Belt, Drive Belt) has four ridges, three grooves and is 1/4" wide, and 92 1/4 inches in length. It comes in black and is made of rubber. The belt transfers the ro...
$16.60
  In Stock
Heating Element - 240V 5400W – Part Number: 279838
Heating Element - 240V 5400W
★★★★★
★★★★★
(199)
PartSelect #: PS334313
Manufacturer #: 279838
The heating element (Flat Can Heating Element 5400W, Heating Element, Whirlpool Dryer Heating Element, Dryer Heating Element) provides heat to the dryer. It is metal and measures 10.5 inches long, 7.5...
$63.52
  In Stock
Dryer Cycling Thermostat – Part Number: WP3387134
Dryer Cycling Thermostat
★★★★★
★★★★★
(89)
PartSelect #: PS11741405
Manufacturer #: WP3387134
This thermostat (Dryer Operating Thermostat, Dryer Cycling Thermostat, Cycling Thermostat, Dryer Thermostat) is used to maintain a temperature of 155 degrees in the dryer drum. The internal bias heate...
$31.58
  In Stock
Thermal Cut-Off Kit – Part Number: 279816
Thermal Cut-Off Kit
★★★★★
★★★★★
(120)
PartSelect #: PS334299
Manufacturer #: 279816
The thermal cut-off (Dryer Thermal Cut-Off Fuse Kit, Dryer Thermal Cut-Off Kit) prevents the dryer from overheating when the dryer high limit thermostat fails in a closed circuit condition. This part ...
$49.78
  In Stock
Dryer High Limit Thermostat – Part Number: WP3977767
Dryer High Limit Thermostat
★★★★★
★★★★★
(26)
PartSelect #: PS11742185
Manufacturer #: WP3977767
A dryer high-limit thermostat (High Limit Thermostat, Hi-Limit Thermostat, Dryer High-Limit Thermostat) is a switch that is actuated by temperature change. This high limit thermostat acts as a safety ...
$24.72
  In Stock
Dryer Door Handle - White – Part Number: W10861225
Dryer Door Handle - White
★★★★★
★★★★★
(281)
PartSelect #: PS11731583
Manufacturer #: W10861225
This white OEM dryer door handle is used to open and close the dryer's door. Comprised of plastic and 6-by-2-inches in dimension, the handle is sold individually and attaches to the dryer door. Your d...
$39.03
  In Stock
Roller Support Tri-Ring – Part Number: WPW10512946
Roller Support Tri-Ring
★★★★★
★★★★★
(5)
PartSelect #: PS11755850
Manufacturer #: WPW10512946
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$9.12
  In Stock
Leveling Foot – Part Number: 49621
Leveling Foot
★★★★★
★★★★★
(12)
PartSelect #: PS1609293
Manufacturer #: 49621
If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs, adjust the legs so...
$7.32
  In Stock
Heating Element Connection Wire Kit – Part Number: 279457
Heating Element Connection Wire Kit
★★★★★
★★★★★
(3)
PartSelect #: PS334206
Manufacturer #: 279457
This kit is used for electric clothes dryers, and it comes with a yellow wire nut.
$10.19
  In Stock
Drive Motor with Pulley – Part Number: 279827
Drive Motor with Pulley
★★★★★
★★★★★
(21)
PartSelect #: PS334304
Manufacturer #: 279827
This motor fits most Whirlpool incorporated dryer brands before 1996. NOTE: Pulley is NOT available separately.
$128.57
  In Stock

Questions And Answers for NED4655EW1

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

18 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
February 25, 2020
Timer will not advance while dryer is running and therefore, dryer will not shut off when clothes are finished drying.
For model number NED4655EW1
Hello Gary, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11773247 for the Timer Switch that will need to be replaced. We hope this helps.

5 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Billie
December 16, 2019
Dryer making noise like something caught. Trouble shooting says check between drum and front or rear of dryer. How do i do that
For model number NED4655EW1
Hi Billie, thank you for your question. We do have a video listed here: https://youtu.be/LxooXQCin8Y, that will show you how to open up your dryer so you can take a look. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Martin
June 14, 2021
Timer will not advance, dryer keeps running and will not stop unless I stop it manually.
For model number NED4655EW1
Hello Martin, Thank you for the question. If the dryer continues to run after the cycle ends, the Timer Switch will need to be replaced. We hope this helps, good luck with this repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Artur
November 30, 2021
Hi, dryer, no heat, checked the heating element it's good. Please advise. Thank you in advance.
For model number NED4655EW1
Hello Artur, thank you for your question. Looking at your model information there are a few parts that you should take out and test to see which one is giving you the issue. The first part to check in this case would be all your thermostats and thermal fuses. Cycling thermostat, part number PS11741405, Thermal Cut-Off Kit, part number PS334299, Dryer High Limit Thermostat, part number PS11742185, and the Thermal Fuse, part number PS11741460. You can test those parts with a multi meter, and they should be reading 0 ohms to be working correctly. Something else you should also check would be your filter and ducts. Make sure there is absolutely no blockage that would restrict air flow in your appliance. We hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
William
January 26, 2020
I need a manual for this dryer
For model number NED4655EW1
Hello and thank you for writing. For your convenience, we have attached the link to your service manual. We hope this helps. Good luck with your repair. http://laundry.manualsonline.com/manuals/mfg/amana/amana_clothes_dryer_product_list.html

Was this helpful?
Thank you for voting!

Common Symptoms of the NED4655EW1

[Viewing 14 of 14]
No heat or not enough heat
Fixed by
these parts
Show All
Will not tumble
Fixed by
these parts
Show All
Noisy
Fixed by
these parts
Show All
Takes too long to dry
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Too hot
Fixed by
these parts
Show All
Shuts off too soon
Fixed by
these parts
Show All
Timer will not advance
Fixed by
these parts
Show All
Door won’t close
Fixed by
these parts
Show All
Will not shut off
Fixed by
these parts
Show All
Marks left on clothes
Fixed by
these parts
Show All
Heat stays on after drum has stopped
Fixed by
these parts
Show All
Touchpad does not respond
Fixed by
these parts
Show All
Will not fill with water
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dryer motor runs, but no heat
To reach the heating element you only need to open the back cover of the dryer (about 8 nut-head screws). Remember to disconnect the power.

To remove the heating element there are two small nut-head screws. Remove the two electric wires. Then you can pull the heating element away.

You can check the heating element with an ohm-meter or visually inspect it to see if the heating element spiral wire is broken.

Don't hurry to dispose the old element. My model includes a small electric safety part. You'll need to transfer it to the new heating element (that comes without it)..

Good luck.
Parts Used:
Heating Element - 240V 5400W
  • Gadi from Irvine, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
2186 of 2354 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Heat
First tried heating element and thermal fuse with no luck. Ordered thermal cutoff and fixed problem. Had I used an ohm meter first I would have determined problem before having ordered heating element and fuse, as both had resistance. I wast just lazy and ordered the took the most common failed components first before taking dryer back off.
Parts Used:
Thermal Cut-Off Kit
  • Vernon from Niceville, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
863 of 920 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would run with no heat.
The repair was easy. the most time consuming part was vacuuming the dust from the back of the Dryer, The repair required removing screw from the back panel of the dryer. Then removing screws from the heating element and unplugging the wires. The only moderately diffculy part was swapping the sensor form the old element.
Parts Used:
Heating Element - 240V 5400W
  • Remie from Mahopac, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
673 of 698 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!