This door switch, also known as a safety switch, is a genuine OEM replacement part for microwaves. It is a safety mechanism that sends signals to the microwaves control system, telling it when the door is open/closed. This ensures that the microwave only operates when the door is securely shut and switches off as soon as the door is open....Read more Over time, this switch can become worn out or damaged. A faulty door switch can result in failure to switch the microwave on/off, lack of heat, and running with the door open. To confirm that the door switch is faulty, use a multimeter to test for electrical failure. To remove the faulty switch, disconnect the wiring connectors and take note of where they are positioned. Place the new switch in position and reattach the wiring connectors to the appropriate terminals and close the microwave door to check that the switch engages appropriately.
This is a high limit thermostat designed for microwaves, ranges and ovens. Made of plastic and metal, this thermostat is designed to open the electrical circuit for your appliance when it reaches a specific internal temperature. In some cases, high limit thermostats can become defective and if your appliance will not turn on, or has a spe...Read morecific error code, it must be replaced. This thermostat is a genuine OEM part that is sold as an individual part and can be replaced by disconnecting the appliance from the power, and accessing its panel, usually located near the bottom of your range, or wherever the heating element is located. Reference your user manual for exact location and replacement instructions.
This convection fan motor assembly is designed to circulate hot air throughout the oven cavity, promoting even heat distribution for more consistent baking and roasting results. By keeping air moving during convection cooking, it helps eliminate hot spots and improves overall cooking performance. Replacement is often needed if the oven fa...Read moren becomes loud, stops spinning, or causes uneven cooking temperatures. Supplied as a complete motor and fan assembly, this component offers a reliable solution for restoring quiet operation and efficient convection airflow when the original fan motor is worn or damaged.
This rubber cushion is supplied by the original manufacturer and has a shaft approximately 1 inch long. The cushion acts as a layer of protection between the oven door and oven frame/cavity. It prevents heat from escaping and protects the oven door and frame from abrasion and damage. If the rubber cushion becomes brittle or loses its elas...Read moreticity, you will likely notice heat escaping from the appliance, uneven cooking, as well as increased noise, and instability when opening or closing the door. Depending on your appliance model you may need to lift the top oven panel to access the cushion. Pull the faulty rubber cushion out from the oven frame and thoroughly clean the area where the new one will be placed to ensure a good seal. Press the new cushion into position and reassemble your oven to complete the repair.
This cooktop and frame assembly is a genuine OEM replacement part supplied by Samsung. It is specially made to fit with Samsung gas ranges. It includes a black frame made of stainless steel and a black glass cooktop. The glass cooktop sits on the countertop and the frame holds it in place. If your burners are not heating properly or the g...Read morelass is cracked, you will need to replace the assembly in order to safely continue using your range.
This dual radiant surface element is designed for use in electric ranges and cooktops with smooth-top surfaces. Constructed from durable materials, it delivers consistent and even heat distribution for reliable cooking performance. Rated at 12,000 BTUs, the element features a dual design that accommodates both 6-inch and 8-inch cookware, ...Read moreoffering flexibility for various cooking needs. Positioned beneath the glass surface, it ensures efficient heat transfer while maintaining a sleek appearance. Installation should be performed with the appliance powered off and disconnected from the electrical supply to ensure safety. Always verify compatibility with your specific model before replacement.
This genuine OEM left-threaded convection fan motor is responsible for spinning the fan blade, ensuring even circulation of hot air within your oven for consistent cooking. It is typically located behind a removable cover at the back of the oven. Signs of a faulty motor include rattling, squealing, or slow and irregular fan rotation. Negl...Read moreecting to replace the motor can result in uneven browning or undercooked portions in your food. To remove the motor, you will need a screwdriver and a socket set. Consult your user guide for instructions on accessing the back panel of your oven. Remove the mounting screws and the fan cover, then the nut securing the fan. Slide out the fan and motor assembly from your oven. Remember, the motor is sold separately from the fan, so consider this when purchasing a replacement.
This oven temperature sensor monitors the temperature inside the oven and sends that information to the control board, helping maintain accurate and consistent cooking temperatures. It plays an important role in proper oven operation and helps ensure food cooks evenly. If the oven is overheating, not heating properly, displaying temperatu...Read morere-related error codes, or producing inconsistent cooking results, a faulty temperature sensor may be the cause. Replacing the sensor can help restore accurate temperature control and reliable oven performance. Before replacing the sensor, testing it with an ohm meter can help confirm whether it is defective.
This hexagon nut cap, also known as a nut cover cap, is a nylon-insulated cylindrical cap with left-hand threads and a 4mm thread size, for counterclockwise tightening. It is sourced from the original equipment manufacturer for use in ranges and microwave oven combos. The cap provides added security to prevent the hexagon nut that it rest...Read mores on from coming loose during operation and causing component instability. Over time it is normal for the hex nut cap to wear down, become damaged, or for its threads to become stripped. To replace a faulty nut cap, use a socket or wrench to unthread it from the hex nut. Place the new cap in its position and secure it in place to complete the repair. It is recommended to replace the fastener at the same time for extended durability.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Fred - For model number NE58m9430SS
July 9, 2026
The rear 2 single elements come on high no matter where I set the temperature. the same occurs with the right front dual element.
Hello Fred, thank you for getting in touch. Based on the issue description, you will need to replace the infinite switches, part number PS11771631 (dual burner), and part number PS11735754, to fix the issue. The control switches regulate power to the burner; if its internal contacts weld together, it cannot cycle the power down. We hope this helps.
It used to take the oven 20 minutes to come to 400, whether on Convection bake or regular bake, it now takes 50 minutes to come to temperature. What would cause this, what do I need to replace?
Hi Mike, thank you for contacting us. The issue could be with the oven temperature sensor, part number PS4240744. You may need to replace it to fix the issue. We hope this solves your problem!
Samsung oven Broiler element tests fine but is getting no power.
Oven is still working just that preheat takes for ever
Hi Vic, thank you for contacting us. The issue could be with the stuck relay on the control board, part number PS12085991. You may need to replace it to fix the issue. We hope this sorts out your problem!
My display is blank, and the relay from my Main Control Board is constantly clicking. I replaced the electronic control. Now, the only thing not working is my Timer. When I press the functions on the printed keypad in the front, everything works except I cannot control the oven heat. Do you think it's the Timer or the printed Ribbon at fault, and is there a way I can check which one is causing the issue? Thank you for your advice.
Hello Andre, thank you for getting in touch. You will need to research the control board with control, part number PS11735878, to fix the issue. We hope this helps.
Was this helpful?
Thank you for voting!
Maxime - For model number NE58M9430SS
October 19, 2025
Samsung oven front fan is always "on".
Hi Maxime, thank you for reaching out. The issue could be with the main control board, part number PS11735626. It is responsible for all the functions of your oven, including heating, cooling, and timer functions. You may need to replace it to fix the issue. We hope this solves your problem!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Convection oven fans were noisy.
17 of 27 peoplefound this instruction helpful.
Sue from De Soto, IL
A Bit Difficult
30 - 60 mins
Screw drivers, Socket set
This oven has two fans that counter rotate. One spins clockwise, the other counterclockwise. Because of this, the motors and the fan blades are different. The schematic shows the counter clockwise rotating fan with a right hand threaded shaft/nut on the bottom and the clockwise motor and fan with the left hand nut on the top. My range
... Read more had the motors in the exact opposite orientation, but the fan blades on the motors as shown on the schematic. The incorrect assembly at the factory (I bought new in the box, so I know this is the first repair) meant that nether fan blade was turning the correct direction. So do yourself a favor, be sure you’re buying the right motor (clockwise or counterclockwise) and be sure you put the right fan blade on the right motor. The Samsung motor ending in F is the counterclockwise motor that has the right hand threaded shaft the clockwise motor with the left hand threaded shaft ends in E.
Oven shut off during self clean cycle and door stayed locked.
23 of 51 peoplefound this instruction helpful.
Uwe from FORT COLLINS, CO
Very Easy
15 - 30 mins
Screw drivers
I took off the back cover after I looked at youtube similar problems. Then removed the little thermostat and un hooked the 2 wires. I looked up the part and after is was delivered couple days later I connected the 2 wies and after putting the back cover on the oven was back to normal. Was such an easy repair and the part was only $11.
Was this helpful?
Thank you for voting!
Bearing went out on the fan
7 of 14 peoplefound this instruction helpful.
John from NASHVILLE, TN
Easy
30 - 60 mins
Screw drivers, Socket set
Slide out the stove. Unplug the electricity. Remove the back panel with a screwdriver. Then go inside the oven and remove the two Philips head screws holding the fan cover. Then remove the nut holding the fan. Note, it is a left handed nut, so turn it right to loosen it. Pull off the fan. Return to the back and remove the nut and two scr
... Read moreews that hold the fan. The fan slides right out. The only problem I had was that the electrical contacts on the new motor were wider than the original. I had to break the plastic so I could separate the wire leads, so that they would fit the new motor. Works like a charm. John
My Orders
