N8417 Power Wheels Ride-On Cars - Overview

This part has been discontinued and is no longer available. The regular 12 volt charge is still available under part number 00801-1778.

This is a genuine Power Wheels replacement part, it is sold individually. The purpose of the Cap Nut is to secure the wheels on the models shown below. When removing this part it usually will be damaged in the process. It is advisable to order a few extra to keep on hand.

This is a genuine Power Wheels replacement that has been sourced from the original manufacturer to be used with driveable toy cars. The foot switch plunger fits into the floorboard. The switch is used to relay power from the batter to the motor when the pedal is pressed onto the switch's plunger.

Power Wheels has manufactured this Lock Nut for use on many models of vehicles. This Lock Nut does contain a nylon ring that helps to ensure that the nut will not loosen over time. The Nut is used in many different applications depending on the vehicle including securing the wheels into place. This part requires a 3/8th wrench, socket, or adjustable wrench to remove or install.

This genuine Power Wheels battery is specially designed for use with a variety of electric vehicles. It is supplied directly from original equipment manufacturer and it is sold individually. Over time batteries get weaker and eventually will not be able to provide enough power to operate the tool. Please note a weak or a defective battery...Read more can damage the charger. This 12-volt battery has been designed to provide the best possible performance, durability and maximum play time without having to re-charge.

This left wheel is a genuine manufacturer approved replacement part. It is specially produced for use with Power Wheels equipment. This is the wheel that move the unit. It is made out of black plastic and it is sold individually. Please note the cover, hubcap and the lock nut to secure it are all sold separately. You will need a wrench ...Read morewhen performing this repair. First make sure to unplug the battery, Position the unit on a side, Remove the hub cap, cover and the lock nut, Replace old wheel with a new one, Reassemble and test

This is an authentic manufacturer-sourced replacement part which is supplied for use with Power Wheels equipment. It is the cover for the wheel, please note the hardware to secure it is sold separately. Please note this high-quality component which is made of durable plastic material with a chrome finish and it is sold individually.