EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖
Sign In | Create Account
| Your Account

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos
Keep typing for more specific results...

Parts Departments

Top Model Types View All

Expert Repair Videos

Symptoms

Troubleshoot like a pro using your model's symptoms

View symptoms

Model Number Locator

Find your model number to unlock guaranteed fit

Find my model number

Articles & Guides

How to Fix a Samsung Dryer 3C Error Code - PartSelect

If a Samsung dryer is displaying a 3C error code, there is a communication issue with the motor and control board. In this article we’ll cover how to fix this issue.

How to Reset Your Bosch Dishwasher - PartSelect.com

A step-by-step guide to resetting a Bosch dishwasher. Learn what errors and issues a reset can fix, how to do a soft reset, and how to do a hard reset.

How to Fix an F11 Code on a Frigidaire Oven - PartSelect.com

Learn how to clear the F11 error code on your Frigidaire oven and replace the keypad overlay and electronic control board with our easy DIY how-to guide.

 See more articles & guides

MWL2047SW119 General Electric Washer - Overview

Diagrams for MWL2047SW119

See every part. Know exactly what you need.

Parts for the MWL2047SW119

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Timer Knob Clip – Part Number: WH1X2117
$16.05
In Stock
Timer Knob Clip
★★★★★
★★★★★
(14)
Part #WH1X2117
The timer knob clip on your washing machine connects the timer knob to the control panel. If your timer knob is damaged or will not stay in place, you may need to replace the clip. If the timer does not advance or the washing machine will not start, this may also be a symptom of a damaged timer knob clip. This part is clear plastic and is about 1 inch in size. Many of our customers have rated this repair as easy, and the only tools you may require are a set of needle-nose pliers. This is an OEM part sourced directly from the manufacturer.
Read less
V-Style Drive Belt – Part Number: WH1X2026
$15.00
In Stock
V-Style Drive Belt
★★★★★
★★★★★
(10)
Part #WH1X2026
This V-shaped drive belt is 29 1/2 inches long x 1/2-inch-wide, and fits both front-load and top-load washing machines. When belts are worn or frayed, they are known to make noise. If you have a top-load washer, a drive belt may be connecting the transmission to the drive motor. It would generally be a rubber V-belt covered in fabric to allow free movement. Or it could be a rubber belt aided by a tensioning device like an idler pulley, to stop the motor from causing too much friction to the belt. For front-loaders, the drive belt goes between the drive motor and the wash basket. If your drive belt is worn or frayed, it should be replaced straight away. After replacing the drive belt, run a wash cycle to ensure the belt is correctly fitted.
Read less
Water Inlet Valve with Outlet Insert – Part Number: WH13X81
$70.95
In Stock
Water Inlet Valve with Outlet Insert
★★★★★
★★★★★
(7)
Part #WH13X81
This washing machine water inlet valve has two ports for water to enter.
Timer Knob with Clip – Part Number: WH1X2757
No Longer Available
Timer Knob with Clip
★★★★★
★★★★★
(6)
Part #WH1X2757
This part is the replacement timer knob for your washer. It is made of white plastic and is about 1 ¼ inches in diameter. The timer knob sits on the timer shaft and allows you to choose the wash cycle that is suitable for you. If your timer knob is stripped or broken, you will need to replace it. To replace the timer knob, carefully remove it from the shaft, and slide the new timer on. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.
Read less
Compression Ring – Part Number: WH2X650
No Longer Available
Compression Ring
★★★★★
★★★★★
(2)
Part #WH2X650
This compression ring works in conjunction with the timer dial.
Four Port Pump – Part Number: WH23X42
No Longer Available
Four Port Pump
★★★★★
★★★★★
(2)
Part #WH23X42
This washing machine pump is white in color and has four ports for water to pass through.
Dishwasher Hose Clamp Kit – Part Number: WH1X2036
$26.40
In Stock
Dishwasher Hose Clamp Kit
★★★★★
★★★★★
(2)
Part #WH1X2036
This is a water hose clamp kit for a variety of appliances including dishwashers and washers. This is a genuine replacement part. The kit includes two hose clamps. The smaller of the two is 1 inch in diameter while the larger one is 2 inches in diameter. The hose clamps secure the end of the water hose in place to prevent the hose from leaking. If you notice leaking from the hose of your appliance, you may need to replace this kit. Protect your hands with work gloves during this repair to avoid injury.
Read less
Levelling Leg Cap – Part Number: WH1X484
$18.22
In Stock
Friction Snubber Pad – Part Number: WH1X2296
No Longer Available
Friction Snubber Pad
Part #WH1X2296
This friction snubber pad is an inch and a half long.
Washer Package of 12 – Part Number: WH2X42D
$15.35
In Stock
Washer Package of 12
Part #WH2X42D
Lower Shaft Seal – Part Number: WH8X281
No Longer Available
Lower Shaft Seal
Part #WH8X281
This seal goes to bottom of the transmission to stop oil from leaking at the bottom of the appliance.
FILT&WASHER – Part Number: WH1X2267
No Longer Available
View More

Common Symptoms of the MWL2047SW119

How this model fails, and the parts that fix it.

Leaking
Fixed by
these parts
Fixing
Fixing
Fixing
Show All
Will not agitate
Fixed by
these parts
Fixing
Show All
Burning smell
Fixed by
these parts
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Fixing
Fixing
Show All
No hot or cold water
Fixed by
these parts
Fixing
Show All
Spins slowly
Fixed by
these parts
Fixing
Show All
Will not drain
Fixed by
these parts
Fixing
Fixing
Show All
Spinning Issues
Fixed by
these parts
Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All

Videos related to models starting with MWL2047SW119

Watch our pros, then fix it yourself.

Replacing the V-Style Drive Belt

Replacing the V-Style Drive Belt

Replacing the Timer Knob Clip

Replacing the Timer Knob Clip

View More
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
GE washer no spinning during spin cycle
174 of 195 people found this instruction helpful.
  • Laurence from Bronx, NY
  • Easy
  • 15 - 30 mins
  • Socket set
Used the spatula to release the front panel (push flat spatula under top about 2 inches from either side to release the two sprng clips holding the front panel on) to expose the tub and motor assembly. Inspected the belt and it seemed worn and a lot of rubber particles were in base of machine. Ordered the belt from partselect - received i t two days later. Loosened 4 motor mount nuts. Removed old belt and replaced. Tightened belt and tightened nuts on motor. Only tricky part is you will need extensions for socket drive because belt is in the way for two of the motor mount nuts. I used a 1/4" small socket wrench, with an extension. No expertise needed on this one.
Read less
Was this helpful?
Thank you for voting!
washer was not agitating or spinning
64 of 68 people found this instruction helpful.
  • Rachelle from Kent City, MI
  • Easy
  • Less than 15 mins
My washer was making noise but not agitating or spinning on any of the cycles that I turned the dial to. Didn't know if it was the transmission or something simple. I did some research and discovered it may be the belt, even though the belt looked new, I changed it anyway by just removing the front of the washer and cutting the belt off a nd putting the new belt on by just turning the pulleys until it fed on. No need to tip it over to do the repair...and it WORKED!! Then I did the happy dance around the house...see woman can repair 2!
Read less
Was this helpful?
Thank you for voting!
old water pump was leaking, needed replacment
45 of 48 people found this instruction helpful.
  • LLOYD from Moffett Field, CA
  • Easy
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set
## WHAT I WISH I'D KNOWN BEFORE I STARTED ##
1. Remove the four hoses first.
2. remove the three screws holding the pump to the structure above BEFORE loosening the flex clamp.
3. with the pump free of the hoses and rest of the washer, then remove the flex coupling clamp from the pump end only; do not remove the flex coupli ng from the motor.
4. remove the old pump.
5. attach the new pump to the top of the flex coupling BEFORE attaching the pump to the upper part of the washer. This is the most difficult step, to get the flex coupling on the pump in a secure fashion using the clamp. It's much easier to do if the pump is not yet connected to the rest of the washer.
6. attach the pump to the washer with the three mounting screws.
7. re-attach the hoses.
8. run the washer and check for leaks.

I made the mistake of taking the flex coupling off the motor then tried to put the flex coupling on the motor and the pump when the pump was already attached to the washer. Major grief :>(

Good luck, it's well worth the effort.
Read less
Was this helpful?
Thank you for voting!
View More