EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

MVWB965HC0 Maytag Washer - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Washer Hose Clamp – Part Number: WP596669
$7.47
In Stock
Washer Hose Clamp
★★★★★
★★★★★
(1)
Part #WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on the appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(7)
Part #72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
Washer D-Shaped Knob Insert – Part Number: WP8536939
$9.62
In Stock
Washer D-Shaped Knob Insert
★★★★★
★★★★★
(2)
Part #WP8536939
This insert is sold individually. Knob not included. Knob is sold separately.
Hose Clamp – Part Number: WP285655
$9.62
In Stock
Hose Clamp
★★★★★
★★★★★
(2)
Part #WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be careful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.
Agitator – Part Number: W11550891
$68.86
In Stock
Agitator
★★★★★
★★★★★
(6)
Part #W11550891
This agitator assembly is an authentic OEM part that is compatible with various models of washing machines. It consists of a central shaft with a series of fins attached to it. When the washer is operating, the agitator rotates back and forth, causing the clothes to rub against each other and against the agitator itself, which helps to loosen dirt and stains. If the agitator does not move or moves erratically while the washer is running, then this is a sign that it is faulty. You may also hear unusual noises such as grinding or rattling and notice that your clothes are not distributed evenly around the agitator during the wash cycle.
Washer Washplate Screw – Part Number: W10752187
$7.47
In Stock
Impact Absorber – Part Number: WP8564458
$9.62
In Stock
Impact Absorber
Part #WP8564458
This is an impact absorber, also known as a sound dampening pad, for washing machines. This sound dampening pad attaches to the top of your washing machine drum to reduce the severity and harshness of vibrations and movement during the washing and spinning cycle, to produce a quieter laundry experience. If your washer is shaking excessively during operation, this pad may be worn out or simply missing, and in need of replacement. To replace this pad, you will need a screwdriver or wrench to access the inner portion of your washing machine and remove the old one and install the new one. This OEM pad measures 5-inches by 3-inches and is sold individually.
Washer Drain Hose – Part Number: W11244231
$26.82
In Stock
Washer Drain Hose
★★★★★
★★★★★
(17)
Part #W11244231
The drain hose carries used water from the washer to your house drain.
SLIDER – Part Number: W10734521
$48.45
In Stock
SLIDER
★★★★★
★★★★★
(1)
Part #W10734521
This clutch slider kit is genuine OEM replacement kit that fits in various models of washing machine. It is a part of the transmission system in your washer which is responsible for controlling the movement of the agitator during the wash and spin cycles. The assembly includes the clutch band, slider, and lock ring. The kit helps to regulate the speed and direction of the agitator or drum. It allows the machine to start and stop spinning smoothly, as well as change speeds as needed during the wash and spin cycles. If the clutch slider kit has worn or damaged components, it can lead to problems like difficulty starting or stopping the machine, excessive noise during operation, or failure to spin properly.
Water-Pump – Part Number: W10876600
$103.58
In Stock
Water-Pump
★★★★★
★★★★★
(4)
Part #W10876600
This drain pump is specially designed to fit in top load washing machines. It is responsible for removing water from the washer tub during the drain cycle and directing it to the household plumbing system through the drain hose. If you notice longer draining times, grinding or rattling sounds, or standing water in the tub at the end of a cycle, the drain pump is likely faulty. This may be due to several reasons such as normal aging, wiring problems or physical damage. It is also common for the drain pump to become clogged with small items such as coins or buttons.
Spray Paint - 12 oz. - White – Part Number: 350930
No Longer Available
Spray Paint - 12 oz. - White
★★★★★
★★★★★
(3)
Part #350930
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a protective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.
Dryer Screw – Part Number: WPW10109200
$7.47
In Stock
Dryer Screw
Part #WPW10109200
11-16 x 3/4 Sold individually.

Questions And Answers for MVWB965HC0

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richard - For model number MVWB965HC0
February 8, 2023
My washer won't spin,it tries to but then it makes a grinding sound then doesn't do anything else
Chris Boyle Profile
Hi Richard, thank you for the question. The issue is most common with the following parts: stator, part number PS10064559, rotor, part number PS10064560, and gearcase, part number PS12745232. We hope this information helps!
$137.59
On Order
Washer Motor Stator
$192.49
In Stock
Washer Motor Rotor
$256.87
In Stock
GEARCASE
2 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Rhon - For model number MVWB965HC0
July 12, 2023
Machine is 3 years old. The fabric softener dispenser suddenly stopped dispensing. The dispenser was still full of fabric softener at the end of the load. The option for dispensing is illuminated so that is not the problem. And today, the fabric softener dispenser was filled with water at the end of the load. Any suggestions? Thx!
Chris Boyle Profile
Hi Rhon, thank you for your question! Check the inlet hose screens to see if there are any blockages. If the washing machine does not have enough water pressure, the fabric softener will not drain. To check the screens, turn the water off with the water valves. Remove the hot and cold water hoses from the back of the washing machine. Use wire-stripping pliers or a suitable tool to remove the filters. Clean and reinstall the filters, and then reconnect the hoses. If the water supply is normal but the fabric softener is not being dispensed, dispenser draw may be clogged. If this does not solve the issue, you will need to replace the fabric dispenser, part number PS11730171. The dispenser itself may be malfunctioning, preventing it from releasing and draining properly. Good luck with your repair!
$58.42
Special Order
DISP ASM - FAB SOFTENER, WHT
Was this helpful?
Thank you for voting!
Robert - For model number MVWB965HC0
May 5, 2024
Is there a some type of filter to change -
Chris Boyle Profile
Hi Robert, thank you for reaching out. Yes, there is a filter under the basket assembly. Its part number is PS10059820. We hope that helps!
$27.36
In Stock
FILTER
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the MVWB965HC0

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Clicking Noise When Agitating
17 of 22 people found this instruction helpful.
  • Chad from SAINT AMANT, LA
  • Easy
  • 30 - 60 mins
  • Socket set
- Shut off power to the washer
- Removed cap on top of agitator
- First, I tried using a ratchet set to remove the bolt that is inside the agitator at the baseplate. Tub would spin when I tried this method, so I used an air impact with long extensions. One press of the impact and the bolt loosened.
- Tied a pair of shoelac es together and stuffed them inside the seam around the agitator baseplate. I put the shoelaces half way around the baseplate. Get it in the seam then with two hands, each with an end of the shoelace, pull up on the baseplate. Success!!
- Installed the new agitator with base plate and then used the ratchet set to tighten the bolt. Didn’t want to take a chance on stripping the bolt inside the agitator with the air impact when tightening.
Was this helpful?
Thank you for voting!
Worn out splines connecting transmission driveshaft to agitator.
13 of 15 people found this instruction helpful.
  • Thomas from MILLBURY, OH
  • Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers, Socket set
DIY'er working on a Maytag Centennial type washing machine should be aware that replacing a a transmission or agitator due to worn out splines is only half a job done well. I originally replaced my transmission due to worn splines, only to discover later that the worn agitator splines caused the new transmission splines to wear out at an accelerated rate. Transmission and Agitator should be replaced together, along with a new Agitator mounting bolt. There are plenty of video's online of how to do this repair so I won't get into that here. Just wanted to drop the above sage advice. Transmissions for these washers aren't cheap.
Was this helpful?
Thank you for voting!
Scratches in Surface
83 of 227 people found this instruction helpful.
  • Michelle from Richardson, TX
  • Really Easy
  • Less than 15 mins
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Was this helpful?
Thank you for voting!