MV18S-24665 Kohler Engine - Overview

This stator kit (15 amp) is an OEM part direct from Kohler. Composed of metal, wiring and protective plastic, the kit is made for use with many small engines. This component provides the necessary voltage for charging the motor battery. A wrench and a pair of pliers are helpful for making the installation. Please refer to the manual for additional repair instructions.

This is an authentic OEM sourced component which is specially made for use with Kohler engines that are commonly installed on a variety of lawn and garden equipment. The part provides an identical replacement for a missing or a faulty rear oil seal that was installed on a new unit. It provides a tight seal between connected components. Pl...Read moreease make sure to refer to the appropriate diagrams for your model for the correct location and application of this part. Keep in mind this high-quality seal is made of durable material and is sold as an individual item.

This breather filter in your lawn and garden equipment traps contaminants in the breather system to prevent them from entering the engine. As the filter ages, it can become clogged or dirty, restricting airflow and leading to issues like poor engine performance, increased pressure inside the engine, and higher oil consumption. Regular rep...Read morelacement is necessary. To remove the filter, consult your user manual for instructions. Typically, you will need to access the breather assembly and remove any covers or components, like the breather hose and upper cylinder valve cover. Then, simply pull out the old filter. Please note that this OEM replacement breather filter is purchased individually.

It is an authentic manufacturer sourced replacement part designed for use with Kohler engines. This carburetor gasket provides an air tight seal between the carburetor and the insulator. Over time gaskets tend to deteriorate and crack eventually requiring replacement. It is made from high quality composite material and it is sold individually.

The breather seal goes next to the air cleaner base. This part is available individually and is made of rubber. An allen wrench might be needed during the installation process. It will require replacing if it becomes broken. This part is an OEM from Kohler for use in engines and generators.

This is an original Kohler replacement part sourced directly from the manufacturer. The gasket-air cleaner is made of a cardboard composite, and is designed for use in over 150 small lawn and garden engines. This part is most often fitted between the elbow gasket and the air cleaner base. Please refer to engine manual for specific repair ...Read moreinstructions. This part is sold individually. A screwdriver may be necessary in making the proper removal and replacement.