MV18-58535 Kohler Engine - Overview

This oil seal is a genuine OEM replacement part designed for lawn and garden equipment. It is a small, circular rubber seal with a diameter of 2 3/8 inches, used to prevent oil leakage between the gear cover and gear shaft, and prevent the entry of contaminants. You will need to replace this oil seal if it is brittle, cracked, or has lost...Read more elasticity. A faulty seal will cause the gears to lose lubrication, increase friction damage, and prematurely wear down the parts. Remember to drain the oil from your equipment before beginning any repairs. Carefully pry the old seal from its mounting position and clear off any debris and residue on the area. Place the new seal in position and ensure it is securely fitted.

Kohler Original Equipment 52 050 02-S Pro Performance Oil Filter. For optimum performance, we recommend changing the oil in your small engine after the first five hours of use. After that, change the oil on a yearly basis or after every 50 hours of use (whichever comes first).

It is a genuine item that is supplied by the original equipment manufacturer for use with Kohler engines commonly installed on lawn and garden equipment. This special gasket helps to provide a tight seal for the valve cover, unfortunately, over time it will wear out and it may begin to crack eventually requiring a replacement to ensure a ...Read moretight seal. Please make sure to check the diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable composite material and is sold individually.

This stator kit (15 amp) is an OEM part direct from Kohler. Composed of metal, wiring and protective plastic, the kit is made for use with many small engines. This component provides the necessary voltage for charging the motor battery. A wrench and a pair of pliers are helpful for making the installation. Please refer to the manual for additional repair instructions.

This is an authentic OEM sourced component which is specially made for use with Kohler engines that are commonly installed on a variety of lawn and garden equipment. The part provides an identical replacement for a missing or a faulty rear oil seal that was installed on a new unit. It provides a tight seal between connected components. Pl...Read moreease make sure to refer to the appropriate diagrams for your model for the correct location and application of this part. Keep in mind this high-quality seal is made of durable material and is sold as an individual item.

This item is available as an individual replacement part. The retainer attaches to the intake valve and the exhaust valve. A set of pliers might be needed during the installation process. It is made of metal and will need to be replaced if it becomes broken. This is an authentic OEM sourced item which is specially produced for use with Kohler engines and generators.

This oil pressure switch is designed for small gas engines to monitor lubrication levels and help protect the engine from damage caused by low oil pressure. Operating on a 12-volt system, it plays a key role in triggering warnings or engine shutdown when pressure drops below safe levels. Built for dependable performance, it’s a practical replacement for maintaining proper engine protection and reliable operation.

Linkage Bushing

It is a genuine item that is supplied by the original equipment manufacturer for use with Kohler engines commonly installed on lawn and garden equipment. The purpose of this component is to provide a tight seal between connected parts, unfortunately, over time the material will wear out and may begin to fail eventually requiring a replace...Read morement. Please make sure to check the diagrams of your model for the correct location and application of this seal. Keep in mind this high-quality hardware is made of durable rubber and is sold individually.

This is an OEM part sourced directly from the manufacturer. The connector is commonly found in Kohler engines. This part is made of high-quality plastic, and is attached to the rectifier regulator to direct the path of wires that carry electrical signals. You may require a wrench when replacing this item. This product is available as an individual replacement part.

This is an authentic OEM sourced part that is intended to be used with lawnmower engines from MTD and Kohler. The filter kit attaches to the intake housing assembly. This item is used to prevent dust and debris from entering the engine's intake. The kit includes the foam pre-filter and the main air filter. This kit is priced as a single item.

It is an authentic manufacturer sourced replacement part designed for use with Kohler engines. This carburetor gasket provides an air tight seal between the carburetor and the insulator. Over time gaskets tend to deteriorate and crack eventually requiring replacement. It is made from high quality composite material and it is sold individually.