MS250 (Type 1) Delta Miter Saw - Overview

Genuine Delta replacement part Includes 1 Carbon Brush with wire lead and brush spring attached, 2 are required. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly ...Read morereplaced power tool components. • Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. • A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. • When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

This is an original replacement part manufactured for use with miter saws. Switches wear out from normal use, and are one of the first parts to break down on power tools. Replacing a worn out switch can be an easy fix, and extend the life of the saw. A screw driver is required to install the switch, please note the switch is sold individually.

This is an authentic Porter Cable replacement part, sourced from the original manufacturer for use with miter saws. The special blade wrench is commonly used when changing the miter saw's blade. Most miter saw blade bolts are left hand threaded and to loosen the bolt the wrench needs to be turned clockwise, please consult the saw's owner's manual. This blade wrench is available as an individual replacement part.

This item is available as an individual replacement part. The roll pin attaches to the guard and is made of metal. If this item becomes bent or broken it will need to be replaced and may require a set of pliers during the installation. This is an OEM part directly sourced from the manufacturer for use in saws, drills, jointers, and sanders made by Delta, Porter Cable, and Black & Decker.

This is a genuine OEM replacement part designed for use with a variety of power tools. It is made out of metal and it is sold individually. It is a standard hardware which has multiple applications based on your tool. You would need a wrench to tighten/loosen this nut.

This conical compression spring that is sold individually. It is an authentic Porter Cable replacement part.