MRA - Overview

This manufacturer-approved air filter system for refrigerators eliminates odors and any impurities. It does this by neutralizing and removing odor-causing molecules. For best results, it is important to change the filter every 6 months to ensure that food is kept fresh, and the humidity is controlled. This part measures about 7 inches wid...Read moree and 5 inches deep. Follow installation instructions provided by the manufacturer when installing this part to ensure accurate results and further guidance. Remember to unplug the refrigerator from the power source before starting this project. The air filter may be located in different places depending on your appliance, but is usually on the inner right or left side. See your manual for exact location. Our customers rated this as a very easy repair that takes only a few minutes; just locate and remove the old air filter and insert the new one to complete the repair, which requires no tools.

This evaporator fan blade is a genuine OEM part that is sourced directly from the manufacturer. The evaporator fan blade circulates air through the refrigerator to control the amount of cold air goes that goes to internal compartments of the unit. It may need to be replaced if the fridge is noisy or not cold enough. This part is made of p...Read morelastic and is sold individually. It will be necessary to disconnect power to the refrigerator and empty the freezer compartment of the refrigerator. The tools needed to complete this repair are a 1/4 inch nut driver and a pair of needle nose pliers.

Sold individually. This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer door panel. The handle mounting shoulder screw is sold individually. For the repair, you will need a pair of pliers.

This gasket retainer clip kit is for freezers. There are 24 pieces in this kit. The clips are what secure the gasket and liner to the freezer lid. The clips are white in color and made of plastic. If you notice frost build up in your freezer or that is it is not maintaining its temperature, this might be because the retainer clips have br...Read moreoken, and this has caused the gasket to become loose. This is a genuine OEM part that is obtained right from the manufacturer, ensuring a quality repair.

This part could be found underneath a fridge, dryer, or freezer. The original foot may be cracked, broken, or perhaps missing altogether. If you notice the appliance is uneven to the floor or wobbling, it may indicate that the levelling foot needs to be replaced. You will need pliers and a block of wood to perform this task. There will be...Read more one adjustable foot found in the package. Lift the dryer and place the wood to keep it propped up. You may need to use the pliers to remove the old foot. Screw the new foot into place using your hand. Once the new leveling foot is in place, lift the appliance and remove the block. Test the machine out to ensure it is now sitting level.

This is a door gasket for the freezer compartment of various refrigerators. Door gaskets are used to seal the cold interior of the freezer compartment, from the warm and ambient temperature of your home. If this door gasket on your freezer door is damaged, moldy, or warped and unable to close and seal properly, it needs to be replaced imm...Read moreediately. This door gasket is gray in color and is easy to remove and install. To replace it, carefully pull and remove the old gasket off, and wrap the new gasket around the perimeter of the door frame. This gasket is sold individually, and does not come with any accessories.

This genuine OEM hinge mounting screw is designed for use in Frigidaire and Electrolux refrigerators, providing a secure and reliable way to fasten door hinges to the cabinet. Built with a durable hex washer head and standard threading, it helps restore proper door alignment and maintain a tight seal to prevent cold air loss. Ideal for re...Read moreplacing worn, stripped, or corroded hardware, this heavy-duty screw ensures long-lasting stability and dependable everyday performance.

This refrigerator deli drawer assembly is designed to provide a dedicated space for storing deli items such as meats and cheeses, helping maintain freshness and organization within your appliance. Engineered for compatibility with select refrigerator models, it slides smoothly in and out for convenient access without opening the main refr...Read moreigerator door. Constructed from durable materials, the drawer offers long-lasting performance and integrates seamlessly into the interior layout. Ideal as a replacement for broken or worn drawers, it supports efficient food storage and contributes to the overall functionality and longevity of your refrigerator.

This part turns the light on/off as the door opens and closes.

This refrigerator glass crisper cover is a durable, clear shelf insert designed to fit securely within the crisper drawer frame. Made from toughened glass, it provides a stable surface for storing food while enhancing visibility and supporting proper moisture retention. By helping to seal the crisper compartment, it contributes to maintai...Read morening ideal humidity levels, which aids in preserving the freshness of fruits and vegetables. This replacement part is ideal for restoring functionality when the original shelf is cracked, missing, or damaged, and is engineered for long-term performance under daily use.

This sliding wire shelf is designed to enhance the storage capacity and organization of upright freezers. Constructed from durable wire, it measures approximately 26.75 inches in width and 14.875 inches in depth, offering ample space for arranging frozen items efficiently. The shelf is engineered to slide smoothly within the freezer cavit...Read morey, allowing for easy access and flexible storage configurations. It is compatible with a range of upright freezer models and is typically installed by aligning it with the designated support rails inside the unit. This component contributes to better airflow and visibility within the freezer, helping maintain consistent temperatures and improving overall usability.

This is a genuine condenser fan blade, which works with refrigerators, freezers and wines and beverage coolers.