MP426CS (41AD426G995) MTD Trimmer - Overview

This OEM bump head knob assembly, known simply as the bump head assembly sometimes, advances the line on your trimmer in the spool. Black in color, it is made of plastic and steel and is sold individually. Tap your trimmer on the ground to see if the cutting line advances to determine if there is a problem with this part. If it will no ...Read morelonger feed, it is likely that this part needs to be replaced. Most of our customers rated this repair as easy. You can attach your new part to the cutting head with no special tools required to complete the repair.

This plastic throttle trigger measures 2.5-inches in length and controls the power, speed, and intensity of the motor for your lawn equipment through the throttle cable and carburetor it is attached to. Sold as an individual part without any securing hardware, this trigger, although made of durable plastic, is a high-use part that will ne...Read moreed to be replaced more often than other parts. Check the user manual for your model for exact placement and installation location of this trigger.

This is a genuine OEM replacement part, it is sold individually. The propose of the Reel and Line Assembly is to dispense the cutting line for the trimmer models below. This is a dual line trimmer. The diameter of the line used in this reel is 0.080

The Fuel Pick Up Line with Filter is an OEM plastic part used to filter and deliver fuel to the carburetor. If broken, the engine will not get fuel and the part should be replaced. This part is rated "Easy" to install and only requires a set of pliers.

The Fuel Return line is a blue plastic tube which attaches to the purge bulb and fuel tank in order to return fuel back to the tank after the primer bulb is pressed. It is rated "Easy" to install and requires pliers and a screwdriver.

This Switch is a black, plastic on/off switch for a trimmer. Installation of this manufacturer-certified switch is rated as "Easy" and requires a screwdriver, wrench set and socket set. Refer to your make, model, and diagrams to ensure this switch is correct for you.

Genuine OEM replacement part, this item is sold individually. The 791-181459 Spring is installed in the 753-04257 slider. When not activated this part will keep the cutting line from coming out of the spool. When the Bump Head Knob Assembly is hit on the ground the springs and slider will be forced up into the spool housing releasing the ...Read morecorrect amount of cutting line. Most of the trimmers will use two of these springs.

This is a genuine anti-rotation screw from the Ryobi manufacturer. The metal screw is compatible with many lawn and garden trimmers. This item works to help secure the clutch cover assembly. This part is sold individually. A screwdriver is needed in making the repair.

This is a foam air filter designed for use within various models of outdoor power equipment like trimmers and leaf blowers. This foam filter measures approximately 3-inches in length and fits within the air filter assembly to prevent contaminants from entering your equipment. Air filters commonly build up with dust and dirt over time, and...Read more will need to be replaced every so often, and regularly inspecting them for build ups can reduce the amount of extra maintenance that is required. If your air filter is clogged, it will lead to worse performance from your equipment, like difficulty starting or not starting at all, and can even damage the carburetor and engine. To replace the air filter, remove the cover for the air filter housing, and remove and dispose of the old filter. Rub a small amount of oil into the new filter before installing it and securing the air filter cover.

Genuine OEM replacement part, this item is sold individually. The 753-04257 Slider is part of the cutting string release system for the Trimmers listed below. If your trimmer is not releasing the cutting line properly check this part for wear and all of the other parts associated with it.

The housing is sourced from the original manufacturer for use with Craftsman gas powered trimmers. This part is a kit that is used to house the throttle trigger. The kit includes the housing, hardware, and the trigger. These housing kits are sold individually, please see part list for related parts such as the throttle cable.

This is a genuine replacement part from original manufacturer. It is compatible with Ryobi, MTD, Troy-Bilt, Yard Man, and Bolens machines. It's used with a variety of power tools including trimmers, tillers, and blowers. O-rings create a seal between solid parts, retaining pressure. Because many machines use more than one type of O-ring, ...Read moreuse care to ensure that the right one is being used in the right spot. This ring is sold individually.