MNA152901 (2020) Murray Lawn Mower - Overview

Hello Jim, Thank you for your inquiry. There are a few things to do before removing the old oil from the mower. 1. Warm up the engine as warming up the mower engine will speed up the oil change because the oil will flow more freely. It will also be a little easier to get all of the old oil out of the engine. 2. Use an air compressor or a clean towel to clean up around the oil fill area. 3. You'll need an oil pan or something similar to catch the oil from the mower. Position the pan on the side of the mower towards which you will tip it to drain the old oil out, and change the oil filter if needed. Check your engine manual (as the engine information is under the separate model number of the engine) for the correct amount and type of oil needed for your engine. Use the mower's dipstick as the final judge on the right oil level, most mowers take between 2/3 and 3/4 of a quart of engine oil. We hope this helps and if you need a part in the future and need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hello Roger, Thank you for the question. We are sorry, we looked up the part and it is listed as No Longer Available/Discontinued. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with the updated substitution number. We hope this helps!

Hello Rich, thank you for the question. The rebuild kit for your carburetor is part number PS18492520. We hope this is what you were looking for!