Models
>
MMV5165BAS14
MMV5165BAS14 Maytag Microwave - Overview
Sections of the MMV5165BAS14
[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Grease Filter
PartSelect #: PS1847969
Manufacturer #: 6802A
If the microwave exhaust fan is not circulating air properly, there could be an issue with the grease filter. A dirty filter will cause your microwave to run less efficiently and can alter the taste o...
$24.24
In Stock
High-Voltage Diode
PartSelect #: PS4235633
Manufacturer #: DE91-70063D
This high-voltage diode is designed for use within various makes and models of microwaves and is a genuine OEM part that converts alternating current (AC) into direct current (DC). If you notice your ...
$36.25
In Stock
Mounting Bracket
PartSelect #: PS4233460
Manufacturer #: DE70-00561A
This is a mounting bracket for a microwave. The part is fitted between your microwave and wall to allows you to secure your appliance safely to the wall studs and install it above your range. It is ma...
$62.92
In Stock
Door Handle - Stainless
PartSelect #: PS11749865
Manufacturer #: WPW10187840
Handle only.
$100.51
In Stock
Micro Switch
PartSelect #: PS11741686
Manufacturer #: WP3405-001034
This is a micro switch, which is also known as a door switch for your microwave. The main reason for needing to replace this part is if you are not getting heat to your appliance. The door switch is l...
$51.43
In Stock
Microwave Light Bulb - 40W
PartSelect #: PS2172588
Manufacturer #: R0713676
Sold individually.
No Longer Available
Thermostat
PartSelect #: PS4226431
Manufacturer #: DE47-20034A
This is a high limit thermostat designed for use within various models of microwaves. The purpose of a high limit thermostat is to open the circuit of the appliance when the internal temperature reach...
$36.64
In Stock
GLASS-COOK TOP LAMP;-,GL
PartSelect #: PS4231970
Manufacturer #: DE67-40063A
The microwave light, or surface light lens, keeps the bulb in your microwave protected from getting cracked, scratched, and damaged. If your lens is defective or broken, or the bulb in your appliance ...
$38.76
In Stock
Assembly BODY LATCH;RVM-1625
PartSelect #: PS4239694
Manufacturer #: DE96-00414A
This is the main latch assembly for various models of Samsung microwaves. This assembly is a main component for the door of the microwave that features three switches that detect the door itself and h...
$116.33
In Stock
Mounting Hardware Installation Kit
PartSelect #: PS4236328
Manufacturer #: DE92-90505G
$36.89
In Stock
Questions And Answers for MMV5165BAS14
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the MMV5165BAS14
[Viewing 3 of 3]No heat
Fixed by
these parts
these parts
Show All
Won’t turn on
Fixed by
these parts
these parts
Show All
Exhaust fan not working
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken handle
Remove the door by lifting up the hinge side so that the two hinge pins disengage from the steel hinge brackets.This can be a bit fiddly so just keep wiggling the door until one of them pops off.
Remove the plastic cover trim piece that surrrounds the window, exposing the phillips head screws that secure the door to the handle.
... Read more Remove the screws to un-install the old handle, they are deep set so if they fall out of the door you will need needle nose pliers to pout them back into the door.
Set teh new handle in place and tighten the screws down snuggly.
Retrace your steps... snap the plastic trim back in place and reset teh door on it's hinges (once again this can be a bit fiddly so take your time.
Eat a Burrito!
Remove the plastic cover trim piece that surrrounds the window, exposing the phillips head screws that secure the door to the handle.
... Read more Remove the screws to un-install the old handle, they are deep set so if they fall out of the door you will need needle nose pliers to pout them back into the door.
Set teh new handle in place and tighten the screws down snuggly.
Retrace your steps... snap the plastic trim back in place and reset teh door on it's hinges (once again this can be a bit fiddly so take your time.
Eat a Burrito!
Read less
Parts Used:
-
Raymond from Bishop, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
43 of 52 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grease filters were missing from the over-the-stove microwave
Why a tenant would remove and discard the grease filters without replacing them is beyond me! But, I removed the filters from the package and slid them into place. Two minutes tops. I would like to add that I ordered these on Thursday afternoon, and I had them on Saturday; awesome customer service!
Parts Used:
-
Lori from Salt Lake City, UT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
64 of 127 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Both bulbs burned out at same time
I r/r the bulb cover, I then removed the burned out bulbs w/ a rag in case they broke they wouldn't have cut my fingers. You turn the bulbs lefty loosy. Installation is just the reverse. Install each bulb and turn righty titey, just snug the bulbs into place. Replace Glass cover and insert one phillips screw in plate and re-tighten
Parts Used:
-
JOHN C from NORTH BEACH, MD
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
18 of 36 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!