Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MMC5080AAB

MMC5080AAB Maytag Microwave - Overview

Get Parts and Repair Help for MMC5080AAB

If you know the microwave repair part you need, you can browse the list of all parts on the MMC5080AAB, or you can search by name or part description. You can also find your part by where it is located on the MMC5080AAB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Light Bulb

Sold individually.


Micro Switch

This is a micro switch, which is also known as a door switch for your microwave. The main reason for needing to replace this part is if you are not getting heat to your appliance. The door switch is located behind the front panel of your appliance. When the appliance door closes, this part will make contact with the door hook, which will allow the microwave to heat. Use caution when making this installation, as high-voltage capacitors found in microwaves can hold a lethal electric charge for longer periods of time, even if the appliance has been unplugged. It is recommended you wear work gloves for this repair.


Micro Switch




Fuse - 15 Amp 250V








USE SAM DE74-20102B



Common Symptoms of the MMC5080AAB

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Blown Fuse - Ps1750182

  • Customer: John from Inverness, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 8 of 10 people found this instruction helpful
Unscrewed the cover of the microwave replaced the blown fuse with the new fuse, plugged in the microwave and tested all functions and everything worked fine. Thx for quick delivery. read more

Light bulb burned out.

  • Customer: Stephen from Cottonwood, AZ
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 11 of 22 people found this instruction helpful
Found instruction on internet,
1. Remove anit-tampering screws with punch and hammer
2. Remove the rest of the screws
3. Removed cover
4. Remove burned out bulb and installed new one
5. INstalled cover
6. Installed screws including the anti tampering onces
7. Op tested unit.
Wife is happy. read more

Buzzing noise, no heating of food

  • Customer: Ted from Hudson, NH
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 6 of 7 people found this instruction helpful
Removed control panel, discharged HV capacitor. Removed old diode, tested to confirm failure. Replaced part. Other than the removal of the panel swapping the part was almost as easy as replacing a light bulb. read more