This is a burner head cap with spark electrode for your range, and it distributes flame evenly to your cookware. It does this by steering the gas to the back and front burner heads, which will divide the gas equally across the cookware. The most common reason for needing to replace it is if the element will not heat, the gas ignitor will ...Read morenot light, and/or you can smell gas. This model is black, has a diameter of exactly 4 inches, and is roughly 3 inches high.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The grommets came apart metal from rubber.
24 of 29 peoplefound this instruction helpful.
Frank from Pierce, ID
Really Easy
Less than 15 mins
I replaced the broken grommets with the new ones. I purchased 8 so I would have back ups because I did not feel the new one would last either. I think they cost TOO MUCH but I could not haggle for price.
Was this helpful?
Thank you for voting!
Sealed burner caps were rusted within and gas leak through the bottom of the caps
13 of 13 peoplefound this instruction helpful.
j from bridgewater, NJ
Easy
15 - 30 mins
Just used a car oil filter band type wrench and rotated the sealed burner cap a 1/4 turn. cleaned up the rust and dirty. Replaced it with the new cap and tightened it with a 1/4 turn by hand. Instruction can be found on Maytag gas installation manual. The burners are working well and just like a new range.
Was this helpful?
Thank you for voting!
range top loose, grommets missing
12 of 16 peoplefound this instruction helpful.
joseph from wildomar, CA
Really Easy
Less than 15 mins
very easy to push each grommet into range top holes