Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MLZ8505ADB

MLZ8505ADB Maytag Cooktop - Overview

Get Parts and Repair Help for MLZ8505ADB

If you know the cooktop repair part you need, you can browse the list of all parts on the MLZ8505ADB, or you can search by name or part description. You can also find your part by where it is located on the MLZ8505ADB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the MLZ8505ADB

[Viewing 2 of 2]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.97

Rubber Grommet

These rubber grommets are commonly used as the bottom feet for gas stovetop grates to secure the grate, and prevent it from moving and scratching the stovetop. The grommet is black...

$11.36

Ignition Knob

This small black knob is used to turn on the igniter.

$62.75

Burner Head Cap with Spark Electrode

This is a burner head cap with spark electrode for your range, and it distributes flame evenly to your cookware. It does this by steering the gas to the back and front burner heads...

$17.66

Burner Knob

Sold individually.

$60.81

Oven Igniter

Used with RV ranges.

$103.00

Regulator Kit with Fitting

This part will cut off the flow of gas to your appliance once it reaches a certain pressure.

Surface Burner Knob - Black

This burner knob is black in color, and has "off, hi and lite" written on the side.

BUMPER

$36.36

Igniter Wire

$78.43

KIT- VALVE

Common Symptoms of the MLZ8505ADB

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The grommets came apart metal from rubber.

  • Customer: Frank from Pierce, ID
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 19 of 22 people found this instruction helpful
I replaced the broken grommets with the new ones. I purchased 8 so I would have back ups because I did not feel the new one would last either. I think they cost TOO MUCH but I could not haggle for price. read more

Sealed burner caps were rusted within and gas leak through the bottom of the caps

  • Customer: j from bridgewater, NJ
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 11 of 11 people found this instruction helpful
Just used a car oil filter band type wrench and rotated the sealed burner cap a 1/4 turn. cleaned up the rust and dirty. Replaced it with the new cap and tightened it with a 1/4 turn by hand. Instruction can be found on Maytag gas installation manual. The burners are working well and just like a new range. read more

range top loose, grommets missing

  • Customer: joseph from wildomar, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 9 of 12 people found this instruction helpful
very easy to push each grommet into range top holes read more