MH60VGFA Master Heater - Overview

Diagrams for MH60VGFA

See every part. Know exactly what you need.

Page A

Parts for the MH60VGFA

$27.64

Pcb

Part #22-521-0002

This is a genuine OEM sourced part which is specially designed for use in the air heaters. It provides an identical replacement for a missing or a faulty PCB module that was installed on a new unit. This is the electronic component that helps to control the units operations. Please make sure to check the owners manual and the appropriate ...Read more

Read less

Regulator Assembly

Part #22-041-0004

$41.88

Spark Module

Part #22-604-0005

This is an original Master replacement part. The spark module is designed by the manufacturer for use in air heaters. This part is a complete component including metal wires and a plastic housing, and it is used to carry an electrical spark for ignition in the machine. You may require a wrench or screwdriver when replacing this item. This part is sold individually.

$6.40

Height Controller

Part #22-512-0005

$33.50

Multi Bkt Assembly

Part #22-504-0002

$60.14

Tubing Assembly

Part #22-605-0001

$6.40

Nozzle

Part #22-518-0001

$9.21

Flange Hexa Nut

Part #22-514-0001

$6.40

Pcb Case

Part #22-506-0001

Valve Knob

Part #22-516-0001

Inlet Connector

Part #22-507-0003

Handle (Gold)

Part #22-511-0005

Questions And Answers for MH60VGFA

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Kyle - For model number MH60VGFA

March 21, 2023

I have the same problem as the 2nd story listed here, I hold the knob down for a long time, over a minute, and it won't really fire up. Only in part/ enough to keep it lit.

Hi Kyle, Thank you for your question. According to your owner's manual, keep the valve knob depressed for at least 30 seconds after lighting the burner. After 30 seconds, release the valve knob. If the burner does not stay lit, repeat the lighting procedure. If it will not stay lit, there may be no spark at the module, you may have an incorrect spark gap, or a corroded spark plug/electrode. If the module wire is loose, re-attach or tighten it if it is loose and if there are any issues with the spark module replace it. Make sure that the spark plug gap is set to 0.16 inches and replace the spark plug if you need to. If you have any questions, please let us know. We look forward to hearing from you!

Was this helpful?