Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MH2175XSQ1

MH2175XSQ1 Whirlpool Microwave - Overview

Get Parts and Repair Help for MH2175XSQ1

If you know the microwave repair part you need, you can browse the list of all parts on the MH2175XSQ1, or you can search by name or part description. You can also find your part by where it is located on the MH2175XSQ1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for MH2175XSQ1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.19

Light Bulb - 40W

This exterior light bulb for your microwave is 40W and has a small screw-in base. To access the exterior light bulb, you will need to remove the panel on the bottom of the microwav...

Order within the next 11 hrs and your part ships today!
$8.83

Charcoal Filter

The charcoal filter in your microwave is designed to improve air circulation and eliminate odors while cooking. If the exhaust fan on your microwave is not working, you may need to replace your charcoal filter. This charcoal filter is located within the intake grille of your microwave, which will need to be unscrewed and opened to gain access to the filter. The manufacturer recommends that you change your charcoal filter every six months. This filter measures 5 inches by 5.375 inches by 0.375 inches. Be sure to measure your current filter to assure correct replacement. This product is sold individually.

Order within the next 11 hrs and your part ships today!
$3.42

Light Bulb - 40W

The 40W lightbulb is found in the interior of your microwave, which will need to be replaced if you have noticed the light is no longer coming on after opening the door. The light ...

Order within the next 11 hrs and your part ships today!
$46.40

Glass Cooking Tray

This a genuine OEM microwave cooking tray. It is also known as a microwave turntable or microwave plate. The function of the tray is to hold and rotate food items while the appliance is in use to ensure the food is being heated evenly. This cooking tray is made of transparent glass, and may need to be replaced if the tray is cracked or broken. A broken tray may prevent it from rotating if the three partial circles on the bottom of the tray will not connect to the turntable driver. This part is sold individually and is approximately 12 inches in diameter. It is recommended to check the drive coupling, or turntable driver, if tray is not turning.

Order within the next 11 hrs and your part ships today!
$28.28

Vent Grille - Black

This part mounts on the top of the microwave above the door.

Order within the next 11 hrs and your part ships today!
$8.83

Grease Filter

This filter collects grease particles in the air from cooking. Sold individually.

Order within the next 11 hrs and your part ships today!
$2.85

Top Mounting Screw

This screw is sold individually.

Order within the next 11 hrs and your part ships today!
$8.99

RING TURN

This support ring sits underneath the glass turntable tray.

Order within the next 11 hrs and your part ships today!
$18.61

Diode

This diode, or high voltage diode, is used in microwaves. It is an electrical current control device that ensures power flows in one direction and not the other way. If your microw...

Order within the next 11 hrs and your part ships today!
$8.73

Fuse

If your microwave is not turning on it could be due to your fuse needing to be replaced. This part protects the microwave by shutting it off if there is an electrical surge. This fuse is just over an inch long, is metallic on both ends and ceramic in the middle. Before beginning this repair, unplug the appliance and wait a few minutes before starting. Remove the outer cabinet which is held in place with two screws. You will then locate the power cord which will lead you to the fuse holder. Determine if the fuse has blown. Using an ohmmeter, you should be able to figure out if it has blown. A proper reading is zero ohms, if it reads as anything else then your fuse has in fact blown. Simply snap the old fuse out of place and place the new one in.

Order within the next 11 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Mounting brackets are fragile and plastic support is easily broken

  • Customer: Richard from San Antonio, TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 567 of 769 people found this instruction helpful
Replaced the intake grille. The grille should be removed prior to cleaning. The entire part is plastic and easily broken so that the two tabs for the mounting screws are shattered and will not hold the part in place. If one attempts to clean the grille using only a moderate amount of pressure with a cloth the fragile plastic will break. The part is poorl... read more

broken glass turntable

  • Customer: Deborah from Baltimore, MD
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 388 of 392 people found this instruction helpful
No repair- just replaced glass turntable.
Right part I needed with first try read more

top plastic grill discolored

  • Customer: RUSSELL from RICHMOND HTS, OH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 320 of 509 people found this instruction helpful
removed old grill with screwdriver and added new one read more