MERB750BAB10 Maytag Range - Overview

Diagrams for MERB750BAB10

See every part. Know exactly what you need.

Parts for the MERB750BAB10

$19.54

Light Bulb - 40W

★★★★★

(78)

Part #8009

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-o...Read more

Read less

$43.18

Long Oven Sensor

★★★★★

(38)

Part #12001656

This long oven sensor is also commonly known as a temperature sensor. It is designed for use with ovens and ranges. It is similar to a thermostat; it measures and regulates the internal temperature of your oven cavity. There is an adapter at one end, a probe at the other, and they are connected by an insulated wire. The probe is approxima...Read more

Read less

$23.60

Leveler Foot Screw (Nylon)

★★★★★

(7)

Part #W11665456

This is a leveling leg for your oven, range, or stove. The leveling legs on your oven allow your appliance to sit perfectly flat. The new one may be longer in length than your original, but will work the same. Install the new leveling leg, and test if you have it adjusted properly by putting the appliance on four legs. Adjust in or out a...Read more

Read less

$21.45

Screw

★★★★★

(6)

Part #W11233072

This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.

$7.47

Range Screw w/Washer

★★★★★

(1)

Part #WP74006515

This is a replacement screw and washer for your oven/range. It is a Phillips-head screw approximately half an inch long, and the washer is approximately 1 inch in diameter. The screw attaches the oven door handle to the door. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.

$142.40

Element with Limiter 6 Inch - 1200W

★★★★★

(19)

Part #W10823711

This is a radiant surface element with limiter, and it works in conjunction with your range. The function of this part is to give heat to the surface directly above it, on cooking area stove top.This model is sold individually and is 1200 watts. The main reason for needing to replace this part is if your element will not heat. Before orde...Read more

Read less

$77.75

Range Door Gasket

★★★★★

(22)

Part #WPW10162384

The oven door gasket on your range functions as a seal between the warm interior of your oven, and the outside. It prevents heat from fleeing your oven when the door is closed. Before making any repairs to your oven you should make sure to wear work gloves to protect your hands, and give your oven time to cool. The only tool you will need...Read more

Read less

Touch-Up Paint - White

★★★★★

(7)

Part #72017

This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more

Read less

$83.45

Bake Element

★★★★★

(29)

Part #WP7406P438-60

This bake element is found on the bottom of the oven.

$80.95

Range Broil Element

★★★★★

(13)

Part #WPW10310249

This broil element is found on the roof of the oven.

$57.38

Range Light Cover Lens

★★★★★

(10)

Part #WP9781049

The light cover lens in your oven is designed to protect the light bulb. If your light cover lens is damaged, you will need to replace it. This part is made of clear glass and is roughly 3 inches in diameter. Many of our customers have rated this repair as easy, and it should take less than 10 minutes to complete. In order to do this repa...Read more

Read less

Spray Paint - 12 oz. - White

★★★★★

(3)

Part #350930

Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a pr...Read more

Read less

Questions And Answers for MERB750BAB10

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Tom - For model number MERB750BAB10

February 18, 2020

Hot surface light stuck on. Is sensor part of burner assy. Or seperate?

Hello Tom, Thank you for your question. The cause of the hot surface light is from one of the burner switches being defective, so each switch would have to be tested using a multi-meter to find out which switch needs to be replaced. Part PS11744486 is the left front and the right rear burner switch for your model, and part PS11744487 is the right front and the left rear burner switch for your model. We hope this helps.

$46.34

Infinite Switch - 6 Inch

$36.85

Range Infinite Burner Switch - 8 Inch

1 person found this instruction helpful.

Was this helpful?

Common Symptoms of the MERB750BAB10

How this model fails, and the parts that fix it.

Element will not heat

Fixed by
these parts

Show All

Little to no heat when baking

Fixed by
these parts

Show All

Oven not heating evenly

Little to no heat when broiling

Touchpad does not respond

Door won’t open after self cleaning cycle

Fixed by
these parts

Show All

Videos related to models starting with MERB750BAB10

Watch our pros, then fix it yourself.

Replacing the Light Bulb - 40W

Replacing the Long Oven Sensor

Replacing the Range Infinite Burner Switch - 8 Inch

Replacing the Element with Limiter 6 Inch - 1200W

Replacing the Range Door Gasket

Replacing the Range Insulation

Replacing the Range Broil Element

Replacing the Leveler Foot Screw (Nylon)

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Right rear burner went bad

155 of 190 people found this instruction helpful.

Mark from Loxahatchee, FL
Really Easy
15 - 30 mins
Nutdriver, Screw drivers

Turned the breaker off, I removed 2 screws securing the range top to the range, opened the top and secured it in the up position, Removed the 2 screws securing the element ,one at a time I swapped the quick connectors from the old element to the new and repeated the process in reverse. I save over $100.00 in labor, plus most companies get ... Read more

Read less

Was this helpful?

Oven not holding 350 F, when cooling the coils did not reheat

163 of 215 people found this instruction helpful.

David from Westford, MA
Really Easy
15 - 30 mins
Screw drivers

Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening, ... Read more

Read less

Was this helpful?

mice had made nests in the insulation wrap in the range

129 of 210 people found this instruction helpful.

Wendy from Red Hook, NY
Easy
More than 2 hours
Screw drivers

I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to ... Read more

Read less

Was this helpful?