EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

MER7700LZ0 Maytag Range - Overview

Diagrams for MER7700LZ0

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven Sensor – Part Number: WPW10181986
$75.13
In Stock
Oven Sensor
★★★★★
★★★★★
(44)
Part #WPW10181986
This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperature. The sensor detects the temperature in the oven cavity. If the following symptoms occur, replacing the temperature sensor could be the solution: Little or no heat when baking, oven not heating evenly, oven will not start, and/or oven is overheating. Often, if the sensor is defective, the oven temperature will fluctuate and be inaccurate by more than 50 degrees. The tool needed for this replacement is a #2 square head screwdriver or a #2 Philips screwdriver. Remember to unplug the range before installing the part.
Screw – Part Number: W11233072
$21.45
In Stock
Screw
★★★★★
★★★★★
(6)
Part #W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
Range Terminal Block – Part Number: WPW10245259
$27.36
In Stock
Range Terminal Block
★★★★★
★★★★★
(20)
Part #WPW10245259
This part is for oven ranges, it connects individual wires and protects the device from electrical surges, voltages, and current. With this part, the house power is connected to the range wire harness. Some symptoms replacing the terminal block could be a solution for are little to no heat when baking, element will not heat and/or it will not start. This part will prevent loosening and will reduce damage caused by corrosion (by two different metals). Refer to the instructional diagram for further replacement guidance and exact placement. You must unplug the appliance before installing this part and wear gloves to protect your hands.
Door Hinge - Active With Spring – Part Number: WPW10299224
$56.33
In Stock
Door Hinge - Active With Spring
★★★★★
★★★★★
(17)
Part #WPW10299224
This is a door hinge active with spring, for your range. The hinge controls the opening and closing of the oven door. If your oven door seems to be sticking, you may want to consider replacing this part. We recommend replacing both hinges at the same time. This model is roughly 9.5 inches long, f4 inches wide, and almost 1inch thick.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(7)
Part #72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
Infinite Control Switch, 6" – Part Number: WP3149404
$52.67
In Stock
Infinite Control Switch, 6"
★★★★★
★★★★★
(10)
Part #WP3149404
This surface element control switch, also known as an infinite switch, is a genuine OEM replacement designed for 6-inch electric burners on select ranges. It regulates the power supplied to the surface element, allowing precise control over heat levels from low to high. Compatible with models from Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, and other associated brands, this dual-coil switch is a common solution for issues such as burners that fail to heat, remain stuck on high, or cannot adjust temperature properly. If the burner heats intermittently or not at all, replacing the switch may restore proper function. Always disconnect power or turn off the circuit breaker before installation. Sold individually.
2 Piece Broiler Pan – Part Number: 4396923
$49.50
In Stock
2 Piece Broiler Pan
★★★★★
★★★★★
(6)
Part #4396923
This broiler pan and roasting rack set is designed to help reduce mess while cooking by allowing grease to drain away from food. Its durable porcelain-coated construction stands up to high temperatures and makes cleanup simple. With approximate dimensions of 16 3/4 inches long, 12 3/4 inches wide, and 1 3/4 inches high, it offers a convenient size for everyday broiling and roasting.
Rack – Part Number: W11520287
$51.95
In Stock
Rack
★★★★★
★★★★★
(22)
Part #W11520287
This chrome-colored oven rack is designed to provide a stable and heat-resistant surface for cooking, baking, and broiling inside compatible range ovens. Engineered for durability, it fits a variety of models and withstands high temperatures and heavy use. Whether you're replacing a damaged rack or adding an extra one for increased cooking flexibility, this component helps maintain optimal oven performance. Sold individually.
Broil Element – Part Number: W10856603
$134.64
In Stock
Broil Element
★★★★★
★★★★★
(7)
Part #W10856603
This broil element supplies heat for cooking purposes and is located in the roof of an oven. If you find there is little to no heat when cooking, a burned-out element, or food is taking too long to cook, these symptoms could be solved by replacing this part. Before starting this replacement, make sure you unplug the range from the power source or shut off from the house circuit breaker. All you need to complete this repair is a Phillips screwdriver. For safety reasons, make sure to wear gloves. Refer to the manual provided by the manufacturer for more instruction.
Dual Element Control Switch – Part Number: WPW10434452
$79.17
In Stock
Dual Element Control Switch
★★★★★
★★★★★
(21)
Part #WPW10434452
This dual element control switch is designed to regulate heat for dual surface burners on select electric ranges. It provides precise temperature control and helps restore functionality when a burner fails to heat, won’t start, or operates inconsistently. Compatible with various models from Whirlpool, Maytag, KitchenAid, and Amana, this genuine replacement part is not universal. Always verify your appliance’s model number before purchasing to ensure proper fit and performance.
Cooktop Cleaner – Part Number: W10355051
No Longer Available
Cooktop Cleaner
★★★★★
★★★★★
(7)
Part #W10355051
This bottle of non-abrasive cooktop cleaner breaks down and gets rid of the hardest baked-on stains and residue without causing any harm to your appliance. The bottle is 10 oz and does not require a large amount of product to do the job. This cleaner is perfectly safe to use on any glass, ceramic, stainless steel, chrome, or porcelain cooktop surface. The cleaner is creamy in texture and provides a protective coat of silicone on smooth surfaces. To apply, use a gentle scrub, sponge, or rag and gently press in a circular motion until the stains are removed.
Range Safety Thermostat – Part Number: WP3196548
$34.74
In Stock
Range Safety Thermostat
★★★★★
★★★★★
(3)
Part #WP3196548
This part is used as a safety feature. If your range overheats this part will shut the range down.

Questions And Answers for MER7700LZ0

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pete - For model number MER7700LZ0
November 17, 2025
Error code E1F6. What do I need to repair this?
Chris Boyle Profile
Hi Pete, thank you for reaching out. To troubleshoot the E1F6 error code, try a hard reset by turning off the power to the appliance for a few minutes. If the error persists, you may need to replace the control board, part number PS16620308, to fix the issue. We hope this solves your problem!
$230.31
In Stock
Electronic Control Board
Was this helpful?
Thank you for voting!
Charles - For model number MER77OOLZO
June 25, 2026
Oven will not heat!
Chris Boyle Profile
Hello Charles, thank you for getting in touch. If your oven is not heating, you will need to inspect the bake element, part number PS11747168, and the broil element, part number PS11731333. You can visually inspect these for breaks, blistering, or gray spots. If you have a multimeter, you can unplug the range and test the bake element and broil element. We hope this helps.
$134.64
In Stock
Broil Element
$79.39
In Stock
Oven Bake Element
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the MER7700LZ0

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
temperature not accurate after 3 1/2 years of happy usage
144 of 272 people found this instruction helpful.
  • Ruth from Oregon, IL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.

The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays s teady but when I turn it to 400 it slowly goes up to 425 degrees.
Was this helpful?
Thank you for voting!
Surface Element Out
61 of 82 people found this instruction helpful.
  • Terry from Rockwall, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Took 2 screws under front edge of smooth top. Unscrewed ground wire from back of smooth top unit. Unplugged 2 wire bundles, from back. Took bad element out , put in new one. Put back together. About 10 min's tops. Easy peasy.
Was this helpful?
Thank you for voting!
Burned terminal block and filter board
95 of 208 people found this instruction helpful.
  • Joseph from Decatur, GA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Socket set, Wrench set
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem.
Was this helpful?
Thank you for voting!