The filter collects lint during the drying cycle. This filter is 12 1/2 inches wide and 10 1/2 inches deep. Replacing the lint filter is an easy repair which requires no tools. When replacing the lint...
$61.46
In Stock
Order within the next 10 hrs and your part ships today!
This Idler Pulley includes the tri-ring and gasket and everything included here is manufacturer-certified. This part maintains correct tension on the drive belt in order to spin the drum properly. If ...
$26.95
In Stock
Order within the next 10 hrs and your part ships today!
The internal-bias thermistor (Thermistor, Dryer Thermister, Dryer Thermistor) prevents the dryer from overheating by monitoring and controlling the temperature of the inside of the dryer drum. It is l...
$47.74
In Stock
Order within the next 10 hrs and your part ships today!
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$13.42
In Stock
Order within the next 10 hrs and your part ships today!
If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs, adjust the legs so...
$11.40
In Stock
Order within the next 10 hrs and your part ships today!
This door catch kit is designed for use in dryers. This is an authentic OEM replacement part. This catch assembly ensures the door of your appliance will close, and remain closed. It allows your appli...
$32.34
In Stock
Order within the next 10 hrs and your part ships today!
The idler pulley wheel is now sold with this arm. This idler pulley is for dryers.
Idler pulley maintains correct tension on the drive belt to spin the drum.
$26.79
In Stock
Order within the next 10 hrs and your part ships today!
Also known as Thermal Cut-Off kit. The thermostat acts as a safety mechanism that keeps the dryer from overheating and the fuse is like a backup system - it's set to trip at a higher temperature than...
$53.28
In Stock
Order within the next 10 hrs and your part ships today!
The 5400W, 240-volt heating element is supplied directly by the manufacturer for use in various models of dryers. It is responsible for generating the heat needed to dry your laundry effectively. It i...
$131.52
In Stock
Order within the next 10 hrs and your part ships today!
This is the moisture sensor for your dryer. It helps detect the amount of moisture in your clothes during the dryer cycle. If you notice your clothes are still wet after an automatic dryer cycle is do...
$10.72
In Stock
Order within the next 10 hrs and your part ships today!
This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.
$16.32
In Stock
Order within the next 10 hrs and your part ships today!
Questions And Answers for MEDE500VW1
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
September 27, 2023
Dryer is making a squealing noise when starting up...will subside after couple of minutes..
For model number MEDE500VW1
Hello Joe, thank you for getting in touch. According to our research, there seems to be an error with the dryer belt, part number PS11748388. You may need to replace it to fix the issue. Glad to be of assistance!
Dryer not getting close as dry as it should at times. Still slightly damp (i.e. towels). On sanitize I hear a clicking sound towards the end of the drying cycle. On Heavy Duty it doesn't seem to have the problem but not sure. Purchased June 2011.
For model number MEDE500VW1
Hello Michael, thank you for getting in touch. Based on the description that you have provided, we would recommend checking the thermistor, part number PS11746740, to fix the issue. We hope this solves your problem!
Screen on vent on roof was totally plugged. Dryer will not heat. Which part do I likely need?
For model number MEDE500VW1
Hello Darrell, Thank you for writing. After the Vent is cleaned out, we suggest also cleaning the Vent hose and make sure it is sitting evenly with no bends or kinks. Clean out the Exhaust Duct the Lint Filter fits into. Check the filter and parts to the Filter to make sure nothing is worn or damaged and allowing Lint through tot he venting system. We hope this information helps!
The door had always opened with the wrong swing and it wasn't til I needed to repair this that I noticed you could change the swing. I changed the swing of the door and then noticed that the clip was included on both sides so i did not need to repair the catch. I still have the part so when it breaks again, I can just pop it in.
I asked for advise, looked around and priced heating elements and thermostats. This was the best combo offered for the price given. It was shipped and received it very quick. Installed it and 5 minutes later, she was running like a champ!