This replacement door catch is for your dryer door. If the catch is broken and the door will not stay shut, the dryer may not turn on. Use a putty knife to pop out the existing door catch by the locki...
The filter collects lint during the drying cycle. This filter is 12 1/2 inches wide and 10 1/2 inches deep. Replacing the lint filter is an easy repair which requires no tools. When replacing the lint...
The internal-bias thermistor (Thermistor, Dryer Thermister, Dryer Thermistor) prevents the dryer from overheating by monitoring and controlling the temperature of the inside of the dryer drum. It is l...
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs, adjust the legs so...
The 5400W, 240-volt heating element is supplied directly by the manufacturer for use in various models of dryers. It is responsible for generating the heat needed to dry your laundry effectively. It i...
This is the moisture sensor for your dryer. It helps detect the amount of moisture in your clothes during the dryer cycle. If you notice your clothes are still wet after an automatic dryer cycle is do...
Ask our experts a question about this model and we'll get back to you as soon as possible!
8 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Doug
April 14, 2023
Looking for dryer door to replace damaged one.
For model number MEDB200VQ0
Hi Doug,
Thank you for your question. The part number for the door is PS11748366. We hope this helps!
We have replaced the thermal fuses. Worked fine for a week. Then it stopped working. It turns on but won’t work. Reviewing your website it could be a myriad of things. Suggestions?
For model number MEDB200VQ0
Hello Mary and thanks for writing.
Please clarify what you mean if you say turns on but won't work? Does it tumble with no heat or not even that much? Looking forward to your reply please always state model number. We do carry other spare parts for units such as yours, for example, Part Number: PS11753116 Good Luck with your repair.
My dryer seemed to take long to dry the clothes for a week or two & then quit producing any heat at all. How do i determine which of the 3 choices listed as potential problems is the solution i need?
For model number MEDB200VQ0
Hello Linda, thank you for your question. We would recommend testing the thermostats first. There are multiple thermostats that can cause that issue. They are PartSelect Number: PS11746386, PartSelect Number: PS11746740, and PartSelect Number: PS991443. To test these parts you would
Set your multimeter to the R X 1 setting. Take each of your meter's probes and touch one to each terminal. You are testing for continuity, and you should receive a reading of either zero or infinity. At room temperature, testing the thermostat should produce a reading of zero. But if a thermostat is tested when it is heated to its limit, a reading of infinity should be produced. We strongly recommend that you test your thermostat at room temperature. If the test you conduct with your thermostat does not produce these results, then you should replace the component. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Proc
April 22, 2022
Dryer gets hot but want blow out backorder dryer is the blower burn out
For model number MEDB200VQ0
Hello Proc, thank you for writing One solution that has worked in the past is to check the nut or Dryer Motor Pulley(item 52 on schematic Bulkhead Parts) PS11746332. It can un-screws itself, disconnecting it from the Blower Housing with Bearing ( item 44) PS11751272. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Is this the circular seal that fits around the drum at the front of the machine?
For model number MEDB200VQ0
Hi, thank you for contacting us. According to our research, the part you are looking for is the drum seal, part number PS990009. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
After a few years of slamming the dryer door (at least that is what my husband says), the catch on the dryer door broke. Using pliers (I used needle nose) squeeze the outer edges of the catch together (vertically). With it compressed, it should slide out easily. My husband had jacked with ours prior to the repair, so the broken piece i
... Read moren the door was actually sideways and would not fit through the hole. Using a screwdriver, I pushed that piece into the door (it lives in the door somewhere now). I was then able to slide out the rest of the old catch. Compress the new catch and insert it into the hole in the door. Push it in until it clicks into place. DONE! Happy Drying!
Found this site by googling, and it works! I searched lint filters and just ordered based on how it looked...LOL! Husband wasn't home, it looked pretty much like the one I had in my hand, so.... I ordered it. It is the perfect fit and seems to have a tighter gasket glued in all around the screen. Let's hope this one lasts longer than 6 mo
... Read morenths! Thank you Parts Select for being so fast!! Filter got here in less than 48 hrs.!