This bottle of non-abrasive cooktop cleaner breaks down and gets rid of the hardest baked-on stains and residue without causing any harm to your appliance. The bottle is 10 oz and does not require a large amount of product to do the job. This cleaner is perfectly safe to use on any glass, ceramic, stainless steel, chrome, or porcelain coo...Read morektop surface. The cleaner is creamy in texture and provides a protective coat of silicone on smooth surfaces. To apply, use a gentle scrub, sponge, or rag and gently press in a circular motion until the stains are removed.
Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.
This burner knob is for cooktops. Burner knob lets you control the heat of the surface burner on the cooktop.
Remove the knob by pulling it straight off its post. Sold individually.
This dual infinite surface element switch regulates the heat output of an electric cooktop burner by controlling the voltage supplied to the heating element, allowing smooth adjustment from low simmering to high-heat cooking. Designed to power burners with both an inner and outer heating ring, it lets you select either the smaller inner r...Read moreing for everyday use or both rings when additional cooking surface and heat are needed. Rated for 15 amps at 240 volts, this switch helps maintain consistent temperature performance. Replacing a worn switch can resolve issues such as a burner that won’t heat, heats inconsistently, responds unpredictably to knob adjustments, or shows signs of electrical problems like buzzing or intermittent power. Installation typically involves disconnecting the appliance from power, accessing the control panel, and transferring the wiring to the new switch.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Surface Element Out
61 of 82 peoplefound this instruction helpful.
Terry from Rockwall, TX
Really Easy
Less than 15 mins
Screw drivers
Took 2 screws under front edge of smooth top. Unscrewed ground wire from back of smooth top unit. Unplugged 2 wire bundles, from back. Took bad element out , put in new one. Put back together. About 10 min's tops. Easy peasy.
Was this helpful?
Thank you for voting!
Glass top stove element stopped working
25 of 35 peoplefound this instruction helpful.
Robert from Fruitland Park, FL
Easy
15 - 30 mins
Screw drivers
really easy! Removed 2 screws under the glass top at the front, access from the open oven door, then removed the ground wire, removed the stove top, took the element holder off,( 2 screws)and replaced with new element, 30 minutes. I ordered the part and came within 18 hrs of ordering it, fantastic experience.
Was this helpful?
Thank you for voting!
Burner element broke
19 of 27 peoplefound this instruction helpful.
Bill from Oberlin, OH
Easy
30 - 60 mins
Screw drivers
Remove two screws on front of range top. they are exposed when you open the oven door. lift and pull back top. unplug two molex connectors, need to squeeze the plastic sides. remove top range to floor. remove six screws and take glass top off metal frame. element is held in with some simple clips and three push on connectors must be remov
... Read moreed. replace with new element and assemble in reverse order.