EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

MDE9206AYW Maytag Dryer - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Drum Support Roller Kit – Part Number: 12001541
$22.52
In Stock
Drum Support Roller Kit
★★★★★
★★★★★
(200)
Part #12001541
The drum support roller (Dryer Drum Support Roller, Drum Roller and Washer Assembly) holds the drum in the proper position while it spins on the support wheels. This part rotates on the roller shaft which is attached to the rear bulkhead. This part should be replaced whenever it does not rotate easily on the roller shaft. If you’re noticing a thump, scrape, or squeal while your drum is spinning, it may be your drum support rollers. Take a look at your existing drum rollers; if one or both of them are worn or broken, you’ll need to replace them. The drum support roller is subject to constant wearing when your dryer is in use, which causes them to break down over time. This part features 1 roller and 2 small washers, and measures approximately 3 inches in diameter. It is constructed with a combination of plastic, metal and rubber. This model comes in black/beige.
Front Glide Kit – Part Number: 306508
$12.85
In Stock
Front Glide Kit
★★★★★
★★★★★
(44)
Part #306508
The front glide is located at the front of the dryer, the drum rides along it. If you hear a metal-on-metal noise when your dryer is running, your front glide may be worn out and require replacing. This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. While you have the front bulkhead removed for this repair, you may want to inspect the felt that lines it. If the felt is damaged, it is recommended that you replace it at the same time. You will need a rivet tool for this installation, as well as a stubby Phillips screwdriver, a 5/16 nut driver, and a drill with a 1/8-inch bit.
Roller Shaft – Part Number: WP6-3129480
No Longer Available
Roller Shaft
★★★★★
★★★★★
(4)
Part #WP6-3129480
This roller shaft is also known as a support roller shaft or a drum roller axle, and is a part for your dryer. The function of this piece is to act as the axle for the drum roller; it provides a place for the roller to spin. The tools required for this repair are a stubby Phillips screwdriver, a 5/16 nut driver, a pair of snap ring pliers, and a 9/16 wrench. The first step before replacing this part should be to disconnect your dryer from the power source.
Multi Rib Belt - 91-5/8 Inches – Part Number: WP33002535
$27.36
In Stock
Multi Rib Belt - 91-5/8 Inches
★★★★★
★★★★★
(37)
Part #WP33002535
This multi rib belt spins the dryer drum during the drying cycle. This belt is 91-5/8 inches in length, 3/8th of an inch wide and has five ridges. It is black in color and made of rubber. You may need to replace the belt if your dryer is noisy or will not tumble.
Lint Filter – Part Number: WP33001808
$45.29
In Stock
Lint Filter
★★★★★
★★★★★
(93)
Part #WP33001808
This is a replacement lint filter for your dryer. The lint filter is approximately 12 1/2 inches in length. Simply remove the existing filter and replace it with the new one. Check for an excess buildup of lint when changing the filter, and clean it after every use.
Dryer Retaining Ring – Part Number: WP9703438
$6.40
In Stock
Dryer Retaining Ring
★★★★★
★★★★★
(3)
Part #WP9703438
This part is a retaining ring, sometimes called a retaining clip, that holds the drum support roller onto the shaft of a dryer. It is made entirely of metal and measures less than an inch in diameter. The retaining ring is a genuine OEM part sourced directly from the manufacturer. The ring may vary in appearance due to manufacturer substitution, but the function is the same. You may need to replace this part if the dryer is noisy during tumbling, will not tumble, or takes too long to dry. Be sure to check drum support roller kit and shaft before ordering parts.
Dryer Idler Pulley Wheel & Bearing – Part Number: WP6-3700340
$19.30
In Stock
Dryer Idler Pulley Wheel & Bearing
★★★★★
★★★★★
(14)
Part #WP6-3700340
The idler pulley tightens the drive belt to properly spin the dryer drum. It is attached to an idler bracket. This part comes with the idler pulley and center bearing. To replace this part, you will need a Phillips screwdriver, channellock pliers, a 5/16ths nut driver, and a flat blade screwdriver. Make sure to disconnect power to the dryer before beginning this repair.
Timer Dial Skirt – Part Number: WP33001621
$27.36
In Stock
Timer Dial Skirt
★★★★★
★★★★★
(70)
Part #WP33001621
This timer dial skirt is just over three inches in diameter. It is white in color and is made entirely of plastic. This skirt has a gray indicator triangle.
Drum Roller Shaft Washer – Part Number: WP312535
$12.85
In Stock
Drum Roller Shaft Washer
★★★★★
★★★★★
(1)
Part #WP312535
If you notice that your dryer is noisy or will not tumble, then you may need to replace the drum roller shaft washer. This drum roller shaft washer is just under an inch in diameter and is sold individually. It is located on the shaft of the drum roller, in the interior of your dryer. To access the drum roller shaft, you will need to remove the front panel of your dryer, and then remove the drum. Before completing this repair, be sure to disconnect the power source from the dryer. Tools required for this repair include a 5/16 nut driver, a stubby Phillips screwdriver, and a pair of snap ring pliers.
Dryer Drum Felt Seal – Part Number: WP33001807
$19.30
In Stock
Dryer Drum Felt Seal
★★★★★
★★★★★
(4)
Part #WP33001807
This is a drum felt seal for your dryer. It creates an airtight seal between the dryer rear panel and the back of the drum. It is important that this seal be flexible so it does not interfere with the function of the appliance. This model may be used for the front or the rear of your appliance. Take note that the adhesive is not included. The most common reason for needing to repair this part is if your dryer will not tumble, or there is not enough heat to properly dry your clothing.
Dryer Door Catch Kit – Part Number: LA-1003
$25.75
In Stock
Dryer Door Catch Kit
★★★★★
★★★★★
(20)
Part #LA-1003
This door catch kit is designed for use in dryers. This is an authentic OEM replacement part. This catch assembly ensures the door of your appliance will close, and remain closed. It allows your appliance to both start and complete a full drying cycle. There are two pieces included in this kit, one catch, and one strike. You open and close the door on such a regular basis that this mechanism can wear out. It is a fairly common part to replace. You will need to remove the door of your dryer to install the replacement catch assembly.
Idler Pulley Shaft Washer – Part Number: WPY312527
$12.85
In Stock
Idler Pulley Shaft Washer
Part #WPY312527
This idler pulley shaft washer is used with many clothes dryers. It is less than an inch long, and it is black in color.

Manuals & Care Guides for MDE9206AYW

Click to download

Questions And Answers for MDE9206AYW

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Heather - For model number MDE9206AYW
October 17, 2022
Hi, Which belt goes with this dryer? That's what I need. Thank you Heather
Chris Boyle Profile
Hi Heather, thank you for your inquiry. We have researched the model you have provided and have found that the part you are looking for is part number PS11741110. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
$27.36
In Stock
Multi Rib Belt - 91-5/8 Inches
4 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Clark - For model number MDE9206AYW
December 15, 2022
How ro replace idler pulley on electric dryer?
Chris Boyle Profile
Hi Clark, thank you for your question! We have researched your model and attached a relevant video that might help you with your problem. We hope that helps!
3 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Kevin - For model number MDE9206AYW
November 8, 2023
Makes a squeaky noise when running! Possibly the belt or? Thanks
Chris Boyle Profile
Hi Kevin, thank you for contacting us. Based on our understanding, the issue is possibly with the belt, part number PS11741110. The belt may have worn out that causes loud squealing noise from the dryer. We would recommend checking the belt to fix the issue. We hope this information is useful!
$27.36
In Stock
Multi Rib Belt - 91-5/8 Inches
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Joe - For model number MDE9206AYW
March 1, 2024
What do I need to replace if the auto dry feature no longer works. The drying will run for days if I let it. Thank you!
Chris Boyle Profile
Hello Joe, thank you for reaching out. Based on the description that you have provided, we would recommend checking the timer, part number PS11741057, to solve the problem. We hope that helps!
$194.59
In Stock
Dryer Timer
Was this helpful?
Thank you for voting!
Carol - For model number MDE9206AYW
March 8, 2024
Needing a belt for this dryer
Chris Boyle Profile
Hi Carol, thank you for contacting us. The drive belt you are looking for is part number PS11741110. If you need help placing an order, customer service is open 7 days a week!
$27.36
In Stock
Multi Rib Belt - 91-5/8 Inches
Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Common Symptoms of the MDE9206AYW

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
noisy rollers, broken latch
673 of 705 people found this instruction helpful.
  • gerry from west covina,, CA
  • Really Easy
  • Less than 15 mins
  • Wrench (Adjustable), Wrench set
first, I unplug the power supply of the dryer then I removed the two screws at the bottom of the dryer then pulled out the front part of the dryer,unplugged the blue & yellow wire for the on/off switch for the door,at the back of the dryer I unscrew the pannel for the belt,disconect the belt,and I unscrew the four screws on both side of t he front pannel to remove the front cover of the drum. Once I removed the front cover of the drum I can now remove the drum itself to access the drum support roller. I unscrew the rollers then replace it with the new once. It was an easy job.
Thank you.
Was this helpful?
Thank you for voting!
Lint into venting area.
518 of 540 people found this instruction helpful.
  • Anthony from DeKalb, IL
  • Really Easy
  • Less than 15 mins
Removal of old lint collector and replace with new one.
Was this helpful?
Thank you for voting!
dryer squeeking
525 of 567 people found this instruction helpful.
  • gerald from park city, MT
  • Easy
  • 1- 2 hours
  • Pliers, Screw drivers, Socket set, Wrench set
removed front panel,lifted top, removed drum and drive belt,remove old rollers and acc and instlled new and reinstalled dryer parts.
Was this helpful?
Thank you for voting!