Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MDE2400AYW

MDE2400AYW Maytag Dryer - Overview

Get Parts and Repair Help for MDE2400AYW

If you know the dryer repair part you need, you can browse the list of all parts on the MDE2400AYW, or you can search by name or part description. You can also find your part by where it is located on the MDE2400AYW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for MDE2400AYW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Manuals & Care Guides for MDE2400AYW

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?


This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this sc...



Sold individually.


Lint Filter

Heating Element

They are all strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The h...

Idler Pulley Wheel

Also called Roller.




Door Handle




Bushing Shaft


Support Drum Bushing

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Heating element replacement

  • Customer: benjamin from Dallas, TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 138 of 162 people found this instruction helpful
Don't pay a repair service for this job when you can do it yourself. Pop the two panels off the back of the machine. The top one is where you'll unhook the old heating element. The bottom one (where the exhaust is) is where you'll need to unhook the broken heating element from it's connector. Place the new heating element's wires down through the back of the... read more

My dryer was working, but it was no heat.

  • Customer: Ekkalak from Cooperstown, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 16 of 28 people found this instruction helpful
I tried to find this thermostat from shops in the town I live, but I could not. So I ordered it from Partselect. The website is very easy to find this kind of thermostat. I can compare my burned thermostat with the picture in the website. Also it send to me on time. I just plug it in the socket behind the dryer. I took only few minutes to repair. read more

dryer making squeeking noise

  • Customer: frederick from walnut creek, CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 13 of 21 people found this instruction helpful
replaced plastic bushing at rear of unit. all you have to do is have acess to the rear of the dryer, no need to open dryer from front or top. squeeking noise stop but wonder how long the plastic part will last!!!! can not beleive that maytag installed such a low quality bushing. no appliance servicemen want to repair unit when noise first occurred. i replace... read more