MDB9979SKZ0 Maytag Dishwasher - Overview

(14)

Part #WP8269145

The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward. The bracket is made entirely of metal. It is recommended to check all brackets, if applicable, because they often wear ...Read more

Read less

$7.47

Washer Hose Clamp

Part #WP596669

This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on th...Read more

Read less

$7.47

Dishwasher Screw

(6)

Part #WPW10348409

Sold individually.

$9.62

Hose Clamp

Part #WP285655

The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be care...Read more

Read less

$7.47

Dishwasher Screw 818 X 5/8

Part #WP9741232

Sold individually.

$68.86

Agitator

(6)

Part #W11550891

This agitator assembly is an authentic OEM part that is compatible with various models of washing machines. It consists of a central shaft with a series of fins attached to it. When the washer is operating, the agitator rotates back and forth, causing the clothes to rub against each other and against the agitator itself, which helps to lo...Read more

Read less

$19.30

Elbow Hose Fitting

(4)

Part #W10685193

This part has a swivel gooseneck fitting and that allows it to be installed closer to the wall. This part has a 3/4" hose thread on one side and a 3/8" copper tubing on the other side.

$55.29

Water Inlet Valve

Part #W11434044

The water inlet valve assembly is a crucial component of dishwashers that controls the flow of water into the unit. This genuine OEM replacement part includes the inlet valve, inlet hose, and hose clamp to ensure the proper water supply for your dishwasher’s operation. Designed for specific models, this part ensures that water is fed into...Read more

Read less

$65.73

HEATER

Part #W11537778

This heating element is a genuine OEM replacement sourced directly from the original manufacturer for use in various models of dishwashers. The element is designed to heat water inside the dishwasher during the wash and rinse cycles to enhance the efficiency of the cleaning process. It is positioned at the bottom of the dishwasher tub, be...Read more

Read less

$22.52

STOP

Part #W11545307

$56.33

Drain Pump

Part #W11497943

$52.95

MANIFOLD

Part #W11545334

Questions And Answers for MDB9979SKZ0

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Eva - For model number MDB9979SKZ0

October 29, 2021

I put clean dishes in and the glasses and cups come out filled with little specks baked on the outside and inside of the cups. More the top than the bottom of of dishwasher. Had an technician here a few years ago didn't fix it.

Hello Eva, Thank you for your inquiry. We have researched the model number you have provided and recommend the following parts to fix your issue: the upper spray arm, the feed tube, the middle spray arm and manifold, the water inlet valve, and the water tubes. If you don't already do so, we also recommend using a rinse aid. We hope this helps.

$64.69

TUBE-FEED

$19.30

Spray Arm

$55.29

Water Inlet Valve

$52.95

MANIFOLD

Was this helpful?

Common Symptoms of the MDB9979SKZ0

How this model fails, and the parts that fix it.

Leaking

Door latch failure

Not cleaning dishes properly

Will not dispense detergent

Will not fill with water

Not drying dishes properly

Marks left on clothes