This silverware basket is gray in color and measures 8 inches wide by 11-1/2 inches high by 12 inches deep. The silverware basket is used to hold small utensils such as forks, spoons, and knives durin...
This lower dishrack roller is less than two inches in diameter. It is made entirely of white plastic. If you find that your dishwasher is making loud noises or the lower rack is getting stuck when you...
This dishwasher door gasket, or door seal, allows the dishwasher door to have an airtight seal when closing the door. No tools are required for this installation, simply remove the existing gasket and...
This upper dishwasher dishrack roller, also known as a dishrack wheel, allows you to roll the dishwasher rack easily on the support rails. If your dishwasher rack is disconnected or the rack is broken...
This is a rail stop for your dishwasher. No tools are required for this repair. it simply pops on and off the end of your slide rail when pressing the locking tab. This part is sold individually, so i...
The door spring retainer is used in dishwashers. It attaches and holds the door spring to the support frame. If your dishwashers door keeps crashing, or both the door and dish rack are falling apart, ...
This wheel mounting strip is ten and a half inches long.
$58.60
In Stock
Questions And Answers for MDB7100AWB
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Janee
December 16, 2019
My dish washer is leaking from underneath back right hand corner of machine. Cant be door ... its in back . not where hose connection is .. what is it?
For model number MDB7100AWB
Hi Janee, thank you for your question. The right side of your appliance is where your water inlet valve is. So if you are experiencing leaking on that side, we would suggest you look at the inlet valve and the connecting parts. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jackie
May 14, 2023
My dishwasher shows the 3 second lock icon, but won't then proceed to wash the dishes. Any thoughts as to how to fix this? Thank you!
For model number MDB7100AWB
Hello Jackie, thank you for contacting us. According to our research, the control touchpads can be locked to prevent unwanted use. If this feature is activated between cycles, the dishwasher cannot be operated until the controls are unlocked. To cancel the control lock, press the control lock button for 3 seconds. The indicator light will go off. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Janee
December 15, 2019
Waaher leaking underneath in right corner from a white round plastic thingy ...why?
For model number MDB7100AWB
Hello Janee and thanks for writing.
Somewhere you have a leak and it is coming out on the right-hand side where you have the dispenser grommet PS11747610, this part could be damaged. Also, check your door gasket PS11746830 and inner door foam PS11748543 and replace it if damaged. It is recommended to replace both parts at the same time. We hope this helps. Please contact us anytime.
My dishwasher is leaking from the bottom , water leaks onto the floor, it’s not flooding our kitchen by any means but it is a nice puddle. I refreshed the door gasket but that didn’t fix it. There is also a screw missing on the door frame at the top. Could water be leaking through the hole of the missing screw?
For model number MDB7100AWB
Hello Shanna, thank you for your question. It may be that the screw was keeping it tight and now that the screw is missing, the unit is not water tight. Also, there may be an issue with the Water Deflector PS11747624. It is used to keep water away from the dishwasher door. We hope this helps.
Took out about 7 torx screws to remove the inner door liner. Discovered evidence of leak coming from the sop dispenser latch, and noticed the grommet had turned soft and was torn. The grommet is only about 1" square. Used nut driver to remove two screws to remove latch assembly. Slipped old grommet off and put new one on, and reattached t
... Read morehe latch. The foam seal at the bottom of the door looked worn, so we replaced it with weatherstripping from home improvement store. The main door seal was brittle, so we replaced it too - just grab an end and pull the old one out. The new one was installed by starting at one end and we just pushed it in place. We used a nut-driver to push it in - we were afraid a screwdriver might damage it. The new door seal required us to latch the door to get it to stay closed the fist couple of days, but now it has loosened up a bit and works as expected. And NO MORE LEAKS. Cost is much less than a new unit!
I opened the end stop of the rack, replaced the roller, and put the end stop back on. I can't believe I paid the repairman the last time $125????? An he put in a regular screw that rusted and broke the roller. Took me 3 minutes! Thanks
I ordered two clips just in case. Turns out I needed both of them. Since I hadn't seen the adjustable tines installed, it took some time to figure out how to put the assembly together.
For some reason I had the dishwasher for 7 years before it occurred to me to order the replacement parts. It's much more efficient to use wit
... Read moreh the adjustable tines properly installed as I can load approximately 25% more plates than before.
