The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward. The bracket is made entirely of metal. It is recommended to check all brackets, if applicable, because they often wear ...Read moreat the same rate and both may need to be replaced. This is an OEM part that is sourced from the authentic manufacturer. Tools needed are a pair of needle nose pliers and a screwdriver.
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on th...Read moree appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be care...Read moreful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.
This part has a swivel gooseneck fitting and that allows it to be installed closer to the wall. This part has a 3/4" hose thread on one side and a 3/8" copper tubing on the other side.
The water inlet valve assembly is a crucial component of dishwashers that controls the flow of water into the unit. This genuine OEM replacement part includes the inlet valve, inlet hose, and hose clamp to ensure the proper water supply for your dishwasher’s operation. Designed for specific models, this part ensures that water is fed into...Read more the dishwasher during the wash cycle, promoting efficient cleaning. Before installation, it is important to unplug the dishwasher and turn off the water supply to avoid any accidents. Wear work gloves for your safety during the installation process. Be sure to verify the compatibility with your dishwasher’s model number, as similar-looking parts may have slight variations in size or design.
This heating element is a genuine OEM replacement sourced directly from the original manufacturer for use in various models of dishwashers. The element is designed to heat water inside the dishwasher during the wash and rinse cycles to enhance the efficiency of the cleaning process. It is positioned at the bottom of the dishwasher tub, be...Read moreneath the lower rack. The heating element includes a bushing, which is a protective covering that prevents water from coming into contact with the electric terminals, and two plastic nuts.
This lower door seal is a flexible rubber gasket designed to create a watertight barrier at the bottom of your dishwasher door, preventing leaks, steam, and detergent from escaping during wash cycles. Its ribbed press-in design and soft sealing lip ensure a secure fit for long-lasting performance. If you notice water pooling on the floor,...Read more visible cracks, or wear on the old gasket, replacing it will restore proper sealing and protect your kitchen from damage. Installation is quick and simple, requiring no special tools, making it an easy DIY solution for maintaining your dishwasher’s efficiency.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
To - For model number MDB4949SKZ
May 18, 2026
I found a small black part in dishwasher. Small round black with holes? Where does it go?
Hello To, thank you for reaching out. It seems you are referring to the inlet tube nut, part number PS16555246. It installs on the bottom left side of the dishwasher cabinet at the water inlet connection. It secures the water inlet tube/assembly in place and helps prevent leaks. If this is not the part, then we will require more information. Please submit a new question, and we will be happy to help you. We look forward to hearing from you!
Looking for Maytag dishwasher Filter or foreign object cup as called in operating instructions.
What is shows in your parts breakdown when i search foreign object cup incorrect ?
Hello Milton, thank you for the question. Based on our research, the filter assembly you are looking for is part number W11680074. We hope this is what you were looking for!
How do I install the door spring on the left ??????????
Hi Julie,
Thank you for your question. If the spring has come off the hinge, the hinge will need to be replaced. The part number for the left-side hinge is PS17629501. We hope this helps!
Code E9 & E0, both of which I believe indicate clogged drain. However, if I push the cancel button three times the machine drains perfectly fine. It doesn’t throw a code every time we use it. I have checked, and there is no blockage to the drainage so I believe it is a sensor issue. What part do you believe this machine needs?
Hello Brett, thank you for contacting us. According to our research, the issue is most likely with the turbidity and optical wash sensor. Its lens is likely blinded by film, or its internal electronics have failed, making it unable to "see" that the water has drained. Replacing it restores the control board's automatic ability to detect an empty tub and prevents false clogging codes. The part number is PS12745367. We hope this solves your problem!
The inner door rubber strip at the bottom with five screw is Compresses and get a drip to the left. The in rubber gasket I would love to by a new one.
This ulis the rubber strick with five screws
Hello Jeffrey, thank you for the question. The gasket you are looking for is the door bottom seal, part number PS16875972. The screws for it are part number PS16745223, sold individually. We hope this is what you were looking for!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lost dishwasher brackets
78 of 118 peoplefound this instruction helpful.
Judith from Essex, MA
Easy
15 - 30 mins
Screw drivers
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
Was this helpful?
Thank you for voting!
Leaking Dishwasher
29 of 32 peoplefound this instruction helpful.
Scott from ISLE, MN
Easy
30 - 60 mins
Screw drivers, Wrench (Adjustable)
After pulling the dishwasher out, I was able to determine the leak was occurring around the plastic nuts on the end of the heating element. I removed the heating element and saw that even though there were washers on the ends that protruded through the backside of the machine, they really weren't sealing the holes the element was sticking
... Read more through. Looking at YouTube videos on the installation procedure, I noticed the element being installed had a sort of metal grommet permanently affixed to each end and the rubber washers were between the grommet and the dishwasher body. I ordered the new part and saw this to be when I received the new part. This grommet allowed the washer to seal the hole, once the plastic nuts were installed on the backside of the dishwasher. This seems to have stopped the leak. I don't know how the original part ever worked correctly, since the washers freely sat on the element with nothing to force them up against the body of the dishwasher and seal the holes. It may have been leaking long before I discovered the problem.
Read less
Was this helpful?
Thank you for voting!
Inlet valve leaking at water connection
17 of 25 peoplefound this instruction helpful.
Joseph from BIRMINGHAM, MI
Really Easy
30 - 60 mins
Nutdriver
The valve has a plastic fitting to attach the the water line with a hose fitting. Was not carful enough with the original and damaged it attaching the water line. Ordered a replacement fitting. While it is possible to replace the water inlet valve without pulling the dishwasher out from the cabinet found it was easier to get at with the m
... Read moreachine out. The video does and good job of showing the removal and replacing the valve. Easy job, don't be like me and be careful attaching the water line.
My Orders
