MCO165UB Magic Chef Microwave - Overview

Diagrams for MCO165UB

See every part. Know exactly what you need.

Parts for the MCO165UB

Microwave mounting plate

Part #3510610400

Turntable motor

Part #3966820200

Micro switch

Part #4415A66910

Microwave door micro switch

Part #4415A17352

Microwave door micro switch

Part #4415A66600

Case fan-t

Part #3511101200

Ac power cord

Part #35113U5W88

Guide cover

Part #3511406200

Oven lamp cover

Part #3511412300

Filter

Part #3511900200

Filter

Part #3511900700

Microwave turntable support

Part #3512517500

Questions And Answers for MCO165UB

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Joe - For model number MCO165UB

June 15, 2021

It slowly stopped heating and finally quit heating, what happened

Hello Joe, Thank you for the question. We suggest testing the Diode. If the diode burns out, the magnetron won't receive enough voltage to produce heat. It should ready to have 0.6 volts. We hope this helps!

1 person found this instruction helpful.

Was this helpful?

Laura - For model number MCO165UB

February 18, 2024

What size screws do I use to installation the microwave under the cabinets.

Hello Laura, thank you for getting in touch. According to our research, to install the microwave under the cabinet, you should use cabinet mounting bolts of size 1/4 x 3-1/8 inches. We hope this information helps!

1 person found this instruction helpful.

Was this helpful?

Bill - For model number MCO165UB

April 23, 2023

Just went dead. How do I get to the fuse?

Hi Bill, thank you for contacting us. We are providing you with the installation instructions that will help you in replacing the noise filter. 1- Remove the screws securing the grill. 2- Release the bottom panel by unthreading the screws. 3- Remove all the screws securing the cabinet. 4- Use the needlenose plier to discharge the capacitor. 5- Now, you will see a noise filter next to the magnetron. 6- Remove the old one and replace it with the new one. We hope this helps, good luck with this repair!

Was this helpful?