EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

MC2255 (2008-07) Jonsered Brush Cutter - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Spark Plug – Part Number: 503235111
$11.28
In Stock
Spark Plug
Part #503235111
Compatible with over 150 models of lawn equipment, this Spark Plug has been sourced directly from the original manufacturer. It is sold individually, made of metal and ceramic components, and is not part of a kit or assembly. The spark plug is used to ignite the air-fuel mixture inside the combustion chamber. You may need to replace the Spark Plug if your 1 cylinder engine won't start, or if your more-than-1 cylinder engine runs rough. Spark Plugs will wear over time and should be inspected regularly. Customers rate this repair as Easy.
Nut Blade – Part Number: 502291101
$12.05
On Order
Nut Blade
Part #502291101
This 25mm blade nut is a fastener that secures the blade to the spindle or shaft of your lawn equipment. It is located at the center of the blade. Signs of a broken blade nut include looseness, stripping, cracks, or excessive wear. Failing to replace a broken blade nut can result in a loose or dislodged blade during operation. To unthread the blade nut on your machine, use a wrench or socket to loosen it. This OEM component is sold individually. To ensure you have the correct number of blade nuts for your machine, refer to the user guide as your equipment may require multiple blade nuts. Consider replacing all of the nuts in one go as they wear out at similar rates.
Bevel Gear Grease – Part Number: 503976401
$20.85
In Stock
Bevel Gear Grease
Part #503976401
This manufacturer-grade bevel gear grease is used to grease transmissions, bevel gears and other gear case assemblies.
Screw – Part Number: 503216618
$6.72
In Stock
Screw
Part #503216618
It is an authentic OEM sourced hardware that is commonly utilized on Husqvarna handheld trimmers and blowers. This screw has multiple applications depending on unit, to ensure correct use of this hardware please make sure to check appropriate diagrams. Please note this hex socket head screw is sold individually.
Chainsaw Starter Rope – Part Number: 505305125
$12.05
In Stock
Chainsaw Starter Rope
Part #505305125
Primarily used in chainsaws, this Starter Rope is an exact replacement part for hundreds of models. It is white and sold individually, not as part of a kit or assembly. The Starter Rope will need to be replaced once you notice signs of it fraying, wearing, or it breaks off. Customers rate this repair as Easy.
Stop Button – Part Number: 537419001
$12.05
On Order
Stop Button
Part #537419001
This stop button is a safety feature used in various types of lawn and garden equipment. It is a genuine OEM replacement part which is responsible for quickly shutting off the engine in case of an emergency or when it is no longer in use. The stop button is fitted into the handle controls for easy access. If the stop button becomes damaged or dislodged from its position, you will not be able to stop the equipment in an emergency. Therefore, it is important to replace the faulty stop button promptly to ensure that this emergency measure remains available, and avoid injury to the operator. Before beginning the repair, ensure that the equipment is turned off. Disconnect the stop button wires and detach the old stop button from the handle controls. Plug the new stop button in in place and reconnect the wires. If your equipment has fasteners with hex sockets, you will need to use a hex key/Allen wrench to remove and install the stop button. Ensure that the button is fitted securely before attempting to use your equipment again.
Chainsaw Screw – Part Number: 503200216
$6.72
In Stock
Chainsaw Screw
Part #503200216
This screw is an authentic OEM part which made for Husqvarna chainsaws. It is designed for multiple uses based on your tool. Please refer to diagrams for correct location and applied use of this screw. It includes one (1) metal screw per order. This is a hex head item so you would need a hex key/allen wrench to install or remove it.
Diaphragm Pump – Part Number: 504130807
$46.15
In Stock
Diaphragm Pump
Part #504130807
This fuel pump diaphragm, also called a membrane or a gasket, is what helps pump fuel from the tank to the engine of your gas-powered lawn equipment. It is normally found attached to the carburetor assembly itself. You can tell that the diaphragm is broken when your engine is not starting properly, lacks power, or frequently stalls. You may also notice that your machine is leaking fuel or smells strongly of gasoline. A broken diaphragm could lead to engine performance problems, and it may eventually stop working altogether. When replacing your old diaphragm, you will need a wrench to disconnect it from the fuel pump housing. Kindly note that this OEM-sourced component is sold individually.
Support Flange – Part Number: 537343502
$32.95
Special Order
Support Flange
Part #537343502
Chainsaw Sealing Ring – Part Number: 503260204
$20.18
In Stock
Chainsaw Sealing Ring
Part #503260204
This is a genuine Husqvarna and Jonsered replacement part that has been sourced from the original manufacturer to be used with chainsaws, brushcutters, stump grinders, pruning saws, and power cutters. The sealing ring is used to provide spacing and to prevent oil leaks between the drive shaft and the cover panel. This item is sold as an individual replacement part.
Dethatcher Locking Pin – Part Number: 502285901
$7.65
Special Order
Dethatcher Locking Pin
Part #502285901
This OEM locking pin is found in your handheld lawn equipment to hold a part, such as a cutting head, spool, or guard, in place and keep it from coming in loose while you are using your machine. If the pin is broken, the component it is supposed to be securing will become wobbly and loose, which can cause your machine to malfunction. To remove a broken locking pin, you can use pliers or a small screwdriver to pull it straight out of the hole. If the pin is stuck, you may need to wiggle it back and forth gently while pulling on it. Take into consideration that this part is sold individually, so refer to your instruction manual to confirm how many of these pins your machine will need.
Trimmer Plug – Part Number: 503201501
$7.65
In Stock
Trimmer Plug
Part #503201501
This threaded plug bolt is a precision-designed component used to securely seal lubrication ports in gear housing assemblies on outdoor power equipment. Engineered with durable, corrosion-resistant material, it helps retain essential grease while preventing dirt, moisture, and debris from entering sensitive internal components. Its threaded design ensures a tight, vibration-resistant fit, supporting long-lasting performance and proper gear protection. Ideal for maintenance or repair, it helps preserve smooth operation and extend the life of gear-driven systems.