MAC5200 Makita Compressor - Overview

Diagrams for MAC5200

See every part. Know exactly what you need.

Page A

Parts for the MAC5200

$101.56

Pressure Switch

Part #412024-E

This is a manufacturer approved replacement part designed to work with Makita air compressors. The pressure switch tells your compressor when to stop and when to start. There are multiple reasons a pressure switch could be leaking air. If it is leaking air the pressure switch should be replaced for a compressor to operate properly and safely.

$120.89

Regulator

Part #410029-E

This is an authentic Makita replacement part that has been OEM sourced to ensure a high level of quality. The regulator is intended to be used with air compressors. This part attaches to the manifold block. The regulator is used to adjust the amount of air pressure inside the tank. This item is sold as an individual replacement part.

$27.66

Inlet and Exhaust Valve Plate

Part #125004-E

$29.20

Drain Cock

Part #413008-E

The drain cock fits onto the air tank with frame. It is an OEM replacement part for Makita air compressors. This part is available individually and is made of metal. A wrench may be required to replace this part if it becomes broken.

$27.66

Oil Filter/crankcase Breather

Part #324003-E

It is an authentic OEM sourced replacement part which is specially designed for use with Makita air compressors. This is an identical replacement for a missing or a faulty oil filter/crankcase breather that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and applica...Read more

Read less

$39.08

Pressure Gauge

Part #411029-E

This replacement pressure gauge is a high quality item designed for Makita air compressors. It is an authentic item that is sourced directly from original equipment manufacturer to provide in-tank pressure readings for the user. Please note one pressure gauge is included per order. When replacing this item you will need a wrench, make sure to unplug the air compressor and bleed out air from the tank.

$46.63

Gasket Kit

Part #GK5200-E

2,4,15and22

$41.51

Air Filter

Part #171006-E

This is an authentic manufacturer-approved replacement part which is specially designed for use with Makita air compressors. Its purpose is to filter out dust and debris from contaminating the engine, over time it may wear out and get clogged eventually requiring a replacement. This high-quality filter is made of durable pleated paper material and is sold individually.

$54.14

Manifold Block

Part #421006-E

$84.80

Crank Shaft

Part #302001-E

$27.66

Oil Sight Gauge

Part #321001-E

This is an authentic slight glass which includes the sealing o-ring gasket. It is a high quality item that is sourced directly from original equipment manufacturer for use with Makita air compressors. It allows user to check the oil level of the unit. Please note one durable clear plastic sight gauge is included per order.

$64.20

Wheel

Part #402007-E

This is a genuine manufacturer-supplied part that is made for Makita air compressors. It is one of the special wheels that support the equipment allowing for easy transportation. Over time it can get damaged or lost eventually requiring a replacement. This high-quality metal wheel is sold individually. Refer to the parts diagrams for your...Read more

Read less

Questions And Answers for MAC5200

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Steve - For model number 700

July 23, 2026

how much compressor oil does it take ? Cannot read the window with red dot. Oil is clear and new

Hello Steve, thank you for contacting us. The oil-lubricated air compressor has a crankcase oil capacity of approximately 0.25 liters (8.5 fl oz / 250 mL). Since the oil is clear and new, it can be very difficult to see the level through the sight glass. Try shining a flashlight at a 45 degree angle onto the sight glass from the side rather than straight on, the reflection off the surface of the oil will make the fluid line visible against the red dot background. The oil level should sit right at the center of the red dot with the compressor resting on flat level ground. Glad to be of assistance!

2 people found this instruction helpful.

Was this helpful?

Bob - For model number MAC5200

March 21, 2026

Just replaced regulator but still have same problem? Will not adjust air ?

Hi Bob, Thank you for your question. If the air compressor will not adjust the air, we recommending checking the regulator, part number 410029-E. We hope this helps!

$120.89

Regulator

Was this helpful?

George - For model number MAC5200

March 17, 2023

is there a fuse on this compressor?

Hello George, thank you for your question. No, this compressor does not have a fuse on or within it. We are pleased to have been able to help.

Was this helpful?