This incandescent lamp is sourced from the original manufacturer, for use in microwaves and ovens. It illuminates the interior of the appliance cavity allowing you to view the food as it cooks or heats. It is typically located behind a panel or a cover inside the microwave/oven. Like any light bulb, the lamp can simply burn out over time...Read more. However, it is also possible that the lamp socket or wiring may be damaged resulting in an electrical failure. Before beginning any replacement, ensure that the appliance is unplugged. Remove the old lamp from its socket and inspect the assembly to ensure it is in good condition. Insert the new lamp in the socket and make sure it is seated correctly before repositioning the panel/cover. Plug the appliance back in to verify that the new lamp is functioning.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
blew fuse
2 of 4 peoplefound this instruction helpful.
larry from LUCERNE, CA
Really Easy
30 - 60 mins
Pliers, Screw drivers
tested cap. with ohm meter which showed a short. A new HV cap., a fuse and it is working fine again.
Was this helpful?
Thank you for voting!
The light bulb went out
1 personfound this instruction helpful.
HOLLY from ALBUQUERQUE, NM
Easy
30 - 60 mins
Screw drivers
Remove the rear casing of the microwave using both a Phillips head screw driver. The lower rear screws require a star shaped bit with a hole in the middle (security bit). Once the rear casing is removed, it is very easy to access and replace the bulb. But the bulb sent was NOT identical to the original which has a straight fitting into
... Read more the receptacle. The one sent had a fitting with a 90 degree. The bulb did not quite fit in place, but I secured it with some black electrical tape.
Read less
Was this helpful?
Thank you for voting!
turntable broke in microwave
charles from tucson, AZ
Really Easy
Less than 15 mins
popped in new plastic turntable, already had the glass tray to put on top. worked`great! total repair time, 10 sec. I couldn't find the part anywhere else.