EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

MA6100W (M1EGSE) LG Range - Overview

Diagrams for MA6100W

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave Micro Switch – Part Number: 6600W1K001C
$21.45
In Stock
Microwave Micro Switch
★★★★★
★★★★★
(4)
Part #6600W1K001C
This micro-switch is designed for use in your microwave. The function of this part is to monitor the door latch position and communicate to the electronic control board whether the latch is open or closed. If your microwave does not provide heat, or will not start properly, you may need to replace the micro-switch. This part is approximately 1 inch in length and 3/4-inch in width. It is made of black plastic with two metal prongs. This is an OEM part sourced directly from the manufacturer. This part is sold individually. Be sure to disconnect the microwave from the power source before you begin this repair.
Micro Switch – Part Number: 6600W1K001D
$21.45
In Stock
Micro Switch
★★★★★
★★★★★
(13)
Part #6600W1K001D
The door switch, often referred to as a primary interlock switch, provides power to the various components in the microwave when the door is in a closed position, and interrupts power when the door is open. This door switch is approximately 1 1/2 inches long, and has 2 metal prongs called terminals that extend from its body. Common symptoms related to a faulty primary door switch include: microwave will not turn/shut off, or the microwave will not heat properly. You can check the switch for continuity using a multi-meter. With the actuator button depressed, you should see continuity between these terminals. If there is no continuity the switch will need to be replaced. NOTE: Before you begin this repair, first make sure your microwave is unplugged, and that your capacitor is discharged. A capacitor stores large amounts of electricity even when your microwave is unplugged.
Microwave Screwtapping – Part Number: 1TTL0402818
$13.92
Special Order
High Voltage Diode – Part Number: 6021W3B001V
$17.15
In Stock
Spring – Part Number: 4970WRA001G
$13.92
In Stock
Spring
★★★★★
★★★★★
(1)
Part #4970WRA001G
This spring provides tension or controlled movement within the appliance mechanism. Engineered for durability, it supports smooth operation and helps maintain proper alignment of connected components.
Microwave Lever – Part Number: 4510W3L003A
$13.92
In Stock
Microwave Lever
Part #4510W3L003A
Microwave Thermostat – Part Number: 6930W1A003B
$13.92
On Order
Spring – Part Number: 4B72023A
$11.77
Special Order
Spring
Part #4B72023A
Lamp,Incandescent – Part Number: 6912W3B002L
$21.45
On Order
Glass Tray – Part Number: 3390W1G005D
No Longer Available
Glass Tray
Part #3390W1G005D
MOTOR, AC SYNCHRONOUS – Part Number: 6549W1S011E
$33.69
Special Order
Cover,Resin – Part Number: 3052W2A021A
No Longer Available
Cover,Resin
Part #3052W2A021A

Common Symptoms of the MA6100W

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave would not rotate or heat up food.
52 of 77 people found this instruction helpful.
  • Joshua from WHITE LAKE, MI
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
After watching a few youtube videos, I used a phillips SD to take controll pannel off to access the switches that sense when microwave door is closed. Swapped out all 3 switched and mocrowave works like new. $20 fix (shipping included)
Was this helpful?
Thank you for voting!
Microwave would not power up.
15 of 26 people found this instruction helpful.
  • Dusty from SNOWMASS VLG, CO
  • Easy
  • 15 - 30 mins
  • Screw drivers
Fun and easy fix for my kids.

The countdown timer was working but no "cooking" happening. Did not hear the familiar sound of the heating part working.

Determined it might be some simple switches for under $15 dollars. Bought one of each. They allow the microwave to turn on/activate by signaling that the door is prop erly latched. My wife noticed that it was failing and then failed over the course of about a day. Several times where it worked, then did not work. The timer was counting down one time and then when she opened the door the microwave heating component turned on. Guess it had activated the switch as she was opening the door.

Procedure to repair
- Unplug
- Remove two screws on front top - allows you to remove the vent. Realized there was a charcoal filter there that I had never replaced so ordered that after the fix.
- Remove two screws to pull off the front right panel (area where your microwave buttons are) One at the top under the before mentioned vent and one under the microwave on the far right corner.
- Have someone hold the panel because wiring is to short to place it on a ledge while connected or take a picture and remove connections. I simply held it while my daughter undid the micro switches.
- Carefully remove micro switches. There were two "orange" button ones so I chose the top one to replace along with the green button one that I had ordered, so I simply pulled an orange from the bottom and a green from the top latch area. You may have remove the part that holds the switches since it was a little tough with the wires in the way and not knowing how the switches stay put.
- plug in new switches and place in the brackets that hold them in place
- reverse everything you did.
Viola - a working microwave vs purchasing a brand new for several hundred dollars or having to call in a technician.I love that my young kids did this project with me and we actually got it running. Don't like to have to throw away more items at the landfill.

Semi-Handy Man
Was this helpful?
Thank you for voting!
Microwave would not heat anything and turntable no longer turned.
7 of 9 people found this instruction helpful.
  • Jon from DANA, IN
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers
I decided the door switch was the problem because 2 problems happened at the same time. I removed the 4 screws for the top outside cover and the 1 screw that held the control board. After removing the control board screw, I lifted it up and removed it. This gave me access to the 3 door switches. I then removed the 2 screws that held t he plastic piece that holds the switches. This made it easier then to replace the switches.
Was this helpful?
Thank you for voting!