M16-711593 Kohler Engine - Overview

It is an OEM item that is made for use with Kohler engines commonly installed on a variety of lawn and garden equipment. This is the valve that the push rod ride inside of which will push the exhaust valve open during the exhaust stroke. A bent push rod or a damaged lifter-valve can not only affect your engine\\\'s performance, they can s...Read moreeriously damage other parts if the problem is not taken care of immediately. This is a high-quality replacement for a missing or a damaged component that was installed on a new unit. To ensure the correct location and installation of this item, refer to the diagrams of your specific model. Note, one durable metal lifter-valve and a tube of lube are included. You will need a screwdriver and a wrench set to take apart the engine when performing this repair.

This stator kit (15 amp) is an OEM part direct from Kohler. Composed of metal, wiring and protective plastic, the kit is made for use with many small engines. This component provides the necessary voltage for charging the motor battery. A wrench and a pair of pliers are helpful for making the installation. Please refer to the manual for additional repair instructions.

This item is available as an individual replacement part. The retainer attaches to the intake valve and the exhaust valve. A set of pliers might be needed during the installation process. It is made of metal and will need to be replaced if it becomes broken. This is an authentic OEM sourced item which is specially produced for use with Kohler engines and generators.

This is an OEM part sourced directly from the manufacturer. The connector is commonly found in Kohler engines. This part is made of high-quality plastic, and is attached to the rectifier regulator to direct the path of wires that carry electrical signals. You may require a wrench when replacing this item. This product is available as an individual replacement part.

This item has been sourced from the original manufacturer to be used with Kohler small engines. The rubber grommet is used with the fuel tank. This item supports the fuel shut-off valve and is used to prevent leaks where the valve fits into the fuel tank. The grommet is available as an individual replacement part.

The breather seal goes next to the air cleaner base. This part is available individually and is made of rubber. An allen wrench might be needed during the installation process. It will require replacing if it becomes broken. This part is an OEM from Kohler for use in engines and generators.

This is an identical replacement for a missing or worn gasket that is generally utilized to provide an air-tight seal for the breather plate, make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Over time the material will begin to get compressed and it may crack eventuall...Read morey requiring a replacement, keep in mind this high-quality gasket is sold individually.

Hose clamp. This clamp replaces 25 237 14-S

Designed to give the operator control over fuel flow, this fuel shut-off valve allows the fuel supply to the engine to be turned on or off safely and easily. It helps prevent fuel leaks, flooding, and carburetor issues during storage, transport, or maintenance. Built for reliable operation in lawn and garden equipment, generators, and pre...Read moressure washers, this valve is ideal for replacing a leaking or stuck shut-off to restore proper fuel control and dependable engine operation.

This is a genuine manufacturer-sourced replacement gasket is specially designed for use with Kohler engines commonly installed on lawn and garden equipment. It is the item which helps to provide an air-tight seal for the valve cover, please refer to the appropriate diagrams of your model for the correct location and application of this ha...Read morerdware. Keep in mind this durable composite material gasket is sold individually, over time the component may wear out and begin to crack eventually requiring a replacement.