LXA5300Y3 Whirlpool Washer - Overview

Diagrams for LXA5300Y3

See every part. Know exactly what you need.

Parts for the LXA5300Y3

$22.52

Lid Switch

★★★★★

(17)

Part #W10820036

This washer/dryer lid or door switch kit serves as a critical safety component, designed to prevent the appliance from operating when the lid or door is open. It ensures that the washer does not fill or spin and the dryer does not start unless the door is securely closed, helping to avoid water spills and potential safety hazards. The kit...Read more

Read less

Water Inlet Valve

★★★★★

(1)

Part #358277

This valve has two ports for water to enter. This valve is compatible with a half inch ID hose and it has two 3/4-11x1/2 NHT hose threads.

$21.45

Center Post Bearing

Part #WP8546455

Sold individually.

Belt Drive Motor Kit with Capacitor

Part #285222

This two-speed motor performs 1725 revolutions per minute in one speed, and 1140 revolutions per minute in the other speed. It runs at 1/2 horsepower and carries 115 volts.

AGITATOR

Part #363633

$55.29

Hose

Part #WP96743

PUMP-WATER

Part #350367

IF FAILED PUMP IS DIE CAST, O

TIMER KIT

Part #902407

HOSE-110.7204600 & 110.7204650

Part #21114

BLOCK

Part #96384

TUB RING, RUBBER

Part #91188

SPRING

Part #350902

Common Symptoms of the LXA5300Y3

How this model fails, and the parts that fix it.

Videos related to the LXA5300Y3

Watch our pros, then fix it yourself.

Replacing the Lid Switch

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Lid closes, switch wouldn't turn on machine.

31 of 47 people found this instruction helpful.

Kenneth from Wilmington, IL
Easy
1- 2 hours
Nutdriver, Screw drivers, Socket set

Used toothpick for a year to push switch acctuator far enough to engage switch. Broke my foot and found time to order part thru PartSelect. Went from cast to boot and received part 2 days after ordered. Had difficulty with foot and getting to switch. Went back into PartSelect and figured out how to dis-assemmble panels thru the diagrams. ... Read more

Read less

Was this helpful?

Washer would fill up, wash, then stop

22 of 31 people found this instruction helpful.

Glen from Plano, TX
A Bit Difficult
30 - 60 mins
Screw drivers

I deduced the lid switch was the problem.

I removed the two screws holding the control panel on. Pulled the control panel back.
Disconnected the ground wire of the lid switch.
removed the two top clamps that hold the panel to the top of the machine.
Pulled back the casing (outside of the washer) and placed ... Read more

Read less

Was this helpful?

One day, I found my dryer continued running after I opened the door. And next day, it stopped working at all. I thought it was time to buy a new one, since my dryer had been used for more than 15 years. But I was curious to know what went wrong, and recalled my friend told me he repaired the door

17 of 21 people found this instruction helpful.

Xiaobin from Cordova, TN
Really Easy
Less than 15 mins
Screw drivers, Wrench set

My daughter found the video on youtube, which showed step by step repairing procedures. I just followed it and fixed my dryer in 15 min.

Was this helpful?