Enter the code DIYDAD10 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on June 17 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
The fan assembly or condenser fan blade fits on the motor shaft and circulates air over the condenser. This cools the refrigerant before it enters the evaporator. If the fan assembly in your room air ...
The fan blade clamp, also known as a clamp spring, are for air conditioners. The clamp supports the fan blade on the motor shaft. When the motor is running, it signals the shaft to turn and rotate, bu...
This part is the replacement air filter for your room air conditioner. It is framed by white plastic and is approximately 18 inches wide and 8.5 inches long. The air filter protects your home from air...
If your air conditioner is not blowing cold air, the problem may be in the capacitor. If the capacitor fails, the compressor will not start and the fan will only blow warm air. The compressor and capa...
This is a rotary switch for your air conditioner. It will allow you to select the different control options, such as the fan and cooling modes. This process happens by the switch sending voltage to th...
Local authorized LG repair shop told me, don't waste my time fixing it. Bench fix is $300 dollars. Purchased part, watched a video and bam. Fixed in 3-4 hours.
Pulled PTAC out of wall sleeve, unhook wire harness from control area, remove condenser shroud and motor and fan blade all at the same time. Replaced motor bracket and re-installed in reverse order.