This fan assembly or also known as a condenser fan blade is used in air conditioners. The blade fits onto the motor shaft and distributes air over the condenser to cool the refrigerant before it goes into the evaporator. This part blows air parallel to the motor shaft which the blade rotates on to successfully circulate the air. It is mad...Read moree from white plastic. *Please note: This part is sold individually. This part comes with a slinger ring. Refer to the manual provided by the manufacturer for installation instructions and further guidance.
The installation kit contains the hardware you need to install the room air conditioner in a window. The kit also includes the accordion filler panels, installation brackets and seal.
This main control board assembly is a genuine OEM replacement for select LG room and window air conditioners. Acting as the unit’s central control system, it manages cooling functions, fan speeds, temperature settings, and operational modes to ensure efficient performance. The board interprets signals from the control panel and sensors, r...Read moreegulates power to the compressor and fan, and operates energy-saving features for optimal functionality. If your air conditioner is experiencing issues such as unresponsive controls, error codes, unpredictable cooling, or failure to power on, replacing the control board can restore reliable operation. For safety, disconnect power before installation and ensure all wiring connections are secure.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The a/c compressor would run continuously even when turned off
3 of 5 peoplefound this instruction helpful.
William from GAINESVILLE, TX
A Bit Difficult
30 - 60 mins
Screw drivers
Unplug the unit next remove the front grill/ filter assembly notice screw on each side and one inside. Lift the bottom out it has clips on each side it takes some effort to remove. Next remove the temperature sensor pull it out from the evaporator. Next remove screws the display control pull it out and remove connecting link to the vent b
... Read morelades that can be pryed with flat blade screw driver. Next remove screws holding the silver box that contains the pcb assembly pull it out the bottom may have to be pried up and pull over edge. Once the box is out as far as the wires allow open the box by bending it open enough to access the wiring and the pcb assembly. Next take pictures of the inside of the box a lot of pictures it will help you to reconnect all the wires correctly take your time once the replacement is complete reinstall the box back in reverse order then reinstall the grill and filter assembly. Next plug in cord push the on button and unit should work as designed. I hope this helps
Read less
Was this helpful?
Thank you for voting!
Kenmore Air Conditioner Remote Broken
1 personfound this instruction helpful.
Patricia from UPPR CHICHSTR, PA
Very Easy
Less than 15 mins
No repair. Just a new remote controller assembly and it works fine.