LTA5660W0 Whirlpool Washer - Overview

Diagrams for LTA5660W0

See every part. Know exactly what you need.

Parts for the LTA5660W0

Agitator Cap Kit

Part #285285

This agitator cap kit consists of the agitator cap itself, a hold down screw, and a seal. The agitator cap is white and made of plastic. Also, the cap is about three inches in diameter as well as three inches long. This cap kit will fit all of Whirlpool/Kenmore's spline driven agitators, except for those ones that are direct drive models.

Belt Drive Motor Kit with Capacitor

Part #285222

This two-speed motor performs 1725 revolutions per minute in one speed, and 1140 revolutions per minute in the other speed. It runs at 1/2 horsepower and carries 115 volts.

AGITATOR

Part #363633

$7.47

Connector Straight

Part #WP16272

DISCONTINUED

Part #86815

PUMP-WATER

Part #350367

IF FAILED PUMP IS DIE CAST, O

DISCONTINUED

Part #354849

TIMER KIT

Part #902407

TOP HINGE (2 REQ'D)

Part #92657

DISCONTINUED

Part #285401

$62.60

SWTCH-TEMP

Part #89335

KNOB, FABRIC SELECTOR

Part #382823

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

It was the heat safety switch in the old drive motor

2 of 3 people found this instruction helpful.

Andrew from HATTIESBURG, MS
Easy
15 - 30 mins
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set

It was fairly easy a few tight spaces to reach in but all in all it was pretty straight forward

Was this helpful?

Washer Had A Continuous Moan And Vibration

Roger from Millis, MA
Really Easy
30 - 60 mins
Nutdriver, Wrench set

I disconnected the drive belt from the motor and ran the motor to isolate it from the rest of the mechanisms. This was the noise. I disconnected the water lines and electrical cord,laid the machine front down. I disconnected the motor plug,removed the two bracket to body bolts and lifted the motor out to the bench. I then transferred th ... Read more

Read less

Was this helpful?