The Water filter reduces contaminants such a s lead, iron, and chlorine from drinking water. Replace every 6 months or 200 gallons for best performance.
This capacitor provides the electrical boost needed for motors or components to start and run smoothly. Proper capacitance supports efficient operation and reduces strain on the system. Replacing a failed capacitor restores reliable performance.
It is an electronic pump that is mounted at the back of the fridge. The compressor contains refrigerant gases that assist in the cooling process and sits next to the condenser. Hot air from the compressor circulates to the condenser where it cools down quickly into a liquid.
This fan assembly circulates air to regulate temperatures and support efficient operation. Proper airflow improves performance and helps protect internal components. Replacing a failing fan assembly restores quiet, reliable operation.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Change filter light came on
7 of 18 peoplefound this instruction helpful.
Ralph from VALLEY SPGS, CA
Very Easy
Less than 15 mins
Took out the old and replaced the new filter
Was this helpful?
Thank you for voting!
Cold water control rusty and leaking water
2 of 6 peoplefound this instruction helpful.
Homer from MARION, VA
Really Easy
30 - 60 mins
Screw drivers, Wrench (Adjustable)
Removed old part very easily and installed the new part without any problems. Used and adjustable wrench and screwdriver
Was this helpful?
Thank you for voting!
Ice chute would not open.
18 of 54 peoplefound this instruction helpful.
Steve from MUKWONAGO, WI
Easy
30 - 60 mins
Screw drivers
Removed ice dispenser and display with small screwdriver from front of the fridge. Pried out the whole piece slowly. This exposed the motor that activates the chute. Plugged in the new motor before any removal to verify the motor was the problem. When it worked, removed old and installed new. 3 screws. Piece of cake.