This handle screw, also known as a mounting screw is designed for LG fridge door handles. It Is responsible for securing the handle to the fridge door and ensuring that it remains firmly attached. A secure door handle allows you to easily open and close the refrigerator as needed. Over time the screw may break, become corroded, or the thr...Read moreeads may wear down. If this happens, the handle may become loose or wobbly, or detach completely from the door. It is recommended to replace the handle screw if it is no longer in good working condition in order to avoid potential damage to the door panel. Each handle screw is sold individually.
This capacitor provides the electrical boost needed for motors or components to start and run smoothly. Proper capacitance supports efficient operation and reduces strain on the system. Replacing a failed capacitor restores reliable performance.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ice chute would not open.
18 of 54 peoplefound this instruction helpful.
Steve from MUKWONAGO, WI
Easy
30 - 60 mins
Screw drivers
Removed ice dispenser and display with small screwdriver from front of the fridge. Pried out the whole piece slowly. This exposed the motor that activates the chute. Plugged in the new motor before any removal to verify the motor was the problem. When it worked, removed old and installed new. 3 screws. Piece of cake.
Was this helpful?
Thank you for voting!
Cold water control rusty and leaking water
2 of 6 peoplefound this instruction helpful.
Homer from MARION, VA
Really Easy
30 - 60 mins
Screw drivers, Wrench (Adjustable)
Removed old part very easily and installed the new part without any problems. Used and adjustable wrench and screwdriver
Was this helpful?
Thank you for voting!
Spring was broken on original unit, had to replace whole lever.
0 of 1 peoplefound this instruction helpful.
Alan from Sun City West, AZ
Really Easy
Less than 15 mins
Screw drivers
removed old lever ( 2 screws ) took apart electrical connection, replaced lever, connected electrical hookup, put in screws. DONE !!!!!!