LSWC307ST (00) LG Range - Parts

This micro-switch is designed for use in your microwave. The function of this part is to monitor the door latch position and communicate to the electronic control board whether the latch is open or closed. If your microwave does not provide heat, or will not start properly, you may need to replace the micro-switch. This part is approximat...Read moreely 1 inch in length and 3/4-inch in width. It is made of black plastic with two metal prongs. This is an OEM part sourced directly from the manufacturer. This part is sold individually. Be sure to disconnect the microwave from the power source before you begin this repair.

The door switch, often referred to as a primary interlock switch, provides power to the various components in the microwave when the door is in a closed position, and interrupts power when the door is open. This door switch is approximately 1 1/2 inches long, and has 2 metal prongs called terminals that extend from its body. Common sympto...Read morems related to a faulty primary door switch include: microwave will not turn/shut off, or the microwave will not heat properly. You can check the switch for continuity using a multi-meter. With the actuator button depressed, you should see continuity between these terminals. If there is no continuity the switch will need to be replaced. NOTE: Before you begin this repair, first make sure your microwave is unplugged, and that your capacitor is discharged. A capacitor stores large amounts of electricity even when your microwave is unplugged.

This temperature sensor, also known as a thermistor, is compatible with various makes and types of appliances. This thermistor uses electrical currents to detect the interior temperature of the appliance it is in and by working with the control board, the board adjusts the level of cooling or heating through its heating or cooling element...Read more, depending on what is needed. If your appliance is being improperly heated or cooled, the temperature sensor may be to blame, and can be tested with a multimeter to check for continuity to see whether it is defective. Check your user manual for exact placement of this thermistor and any diagnostic information.

This transparent inner door glass is designed for LG range ovens and serves as a key component in maintaining heat insulation while allowing visibility into the oven during cooking. Made from heat-resistant material, it helps retain internal temperatures for consistent baking and roasting performance. Replacing a damaged or cracked inner ...Read moreglass restores the oven’s energy efficiency and ensures safe operation. This OEM replacement part is manufactured to fit specific LG models and is intended for use when the original glass is chipped, broken, or compromised. Installation typically involves removing the oven door, disassembling the inner panel, and securely fitting the new glass in place. Always confirm your oven model before installation to ensure compatibility.

This thermostat is a temperature-sensing device that controls and maintains the desired temperature inside the oven. It is an OEM replacement part that works by monitoring the internal oven temperature and signaling the heating elements to turn on or off as needed to maintain the set temperature. You can find the thermostat at the back of...Read more the oven, near the top or bottom. In some ovens, it may be located behind the control panel. Thermostat failure can occur due to wear and tear, electrical issues, or damage. If the thermostat fails, it can result in temperature inconsistencies, such as the oven not reaching the desired temperature or overheating. This can lead to uneven cooking, undercooking, or burning of food. Before beginning this repair, disconnect the oven from the power source to avoid electrical hazards Locate the thermostat and carefully disconnect the wires connected to it. It is advisable to take a picture or label the wires to ensure proper reconnection later. Gently pull out the thermostat from its housing and position the new thermostat in place. Reattach the wires to the corresponding terminals on the new thermostat. Reconnect the oven to the power source and test that the new thermostat is functioning by monitoring the temperature inside the oven.

This 120-voltage, 20-watt halogen lamp is an authentic OEM part made for Samsung microwaves. It is a type of lightbulb that uses a mixture of halogen gas to ensure longevity and higher lighting quality. The lamp is found behind a panel or cover inside the microwave cavity, where it illuminates the interior of the appliance during heating....Read more It is common for the filament inside the bulb to wear down over time which can result in the failure of the bulb. If your halogen lamp is no longer working, you will be unable to see inside the microwave cavity and monitor your food during use. Each lamp is sold individually.