LSE4616ST (00) LG Range - Overview

Diagrams for LSE4616ST

See every part. Know exactly what you need.

Diagram

Parts for the LSE4616ST

$21.45

Microwave Thermostat

★★★★★

(12)

Part #6930W1A003X

The range thermostat is also commonly known as a stove, oven, cooktop, or range thermal fuse. This thermostat protects your oven from excessive heating, and will shut the oven heat off if excessive heating is detected. This is a genuine part sourced directly from the original manufacturer. You may need to replace this part if your applian...Read more

Read less

$75.13

Temperature Sensor

★★★★★

(3)

Part #EBG61305805

This temperature sensor, also known as a thermistor, is compatible with various makes and types of appliances. This thermistor uses electrical currents to detect the interior temperature of the appliance it is in and by working with the control board, the board adjusts the level of cooling or heating through its heating or cooling element...Read more

Read less

$11.77

Time Delay Fuse

★★★★★

(3)

Part #3B74133Q

The fuse-time delay may also be known as a line fuse or a microwave fuse, and it is a piece for your microwave. The function of this part is to shut off the microwave if there is a power surge, in order to protect your microwave from damage. You should consider having a service technician install this part as the high-voltage capacitors i...Read more

Read less

$21.45

FOOT

★★★★★

(1)

Part #4778W1N001B

This is a genuine OEM leveling leg for various models of LG ranges. This leg is used to stabilize and support the range, and if damaged, broken, or missing, will cause your range to rock back and forth. Installing this leg simply requires you to lift on the corner you are installing it under, and then screw it in place until your range is...Read more

Read less

$121.56

MOTOR,AC FAN

★★★★★

(3)

Part #EAU62343001

This genuine OEM convection fan motor powers the fan that circulates hot air evenly throughout the oven cavity, ensuring consistent temperatures and uniform cooking and baking. This motor is typically located at the back of your oven, behind a protective panel, where it drives the convection fan. If the motor is broken, you might notice u...Read more

Read less

$70.95

Oven Rack

★★★★★

(1)

Part #MHL63411403

This genuine OEM rack is placed inside your oven cavity, serving as a stable surface for your cookware. It measures approximately 25 inches by 17 inches. The wires can warp due to repeated temperature changes over time. Additionally, heavy or unevenly distributed loads can bend the rack structure, and accidental impacts during cleaning ma...Read more

Read less

$104.33

HEATER,SHEATH

★★★★★

(2)

Part #MEE62306504

This sheath heater is a genuine OEM heating element designed for select LG oven and range models. Positioned at the top of the oven interior, it provides the heat necessary for broiling and, in some configurations, baking. Engineered to LG’s specifications, this component ensures consistent performance and even heat distribution. It repla...Read more

Read less

$13.92

Screw,Customized

Part #4000W4A003A

$13.92

Common Nut

Part #1NHB0500032

$144.87

GLASS WINDOW

Part #4890W1N005L

This oven inner door glass panel is designed to replace cracked, broken, or damaged interior door glass and restore proper oven performance and safety. Made from heat-tempered safety glass, the panel helps retain heat inside the oven cavity, supports consistent cooking temperatures, and provides a clear view of food while baking or roasti...Read more

Read less

$13.92

SPRING

Part #MHY64083701

$36.85

FAN,CONVECTION

Part #MDG62882901

Questions And Answers for LSE4616ST

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Hans - For model number LSE4616ST

December 13, 2024

Overnight turns off before desired temperature is reached

Hi Hans, Thank you for your question. If the oven is not heating correctly, the issue may be with the oven temperature sensor. The oven temperature sensor monitors the oven temperature and signals the electronic control board to turn the elements on and off. Before removing this part from the oven and testing it for continuity with a multimeter on the Rx1 setting, unplug the oven from the electrical outlet. This test needs to be done with the sensor at room temperature to produce accurate results. The reading should be between 1080 and 1100 ohms. If you get any other reading, you need a replacement temperature sensor. If the sensor is fine, you will need to check the elements, the electronic control board and the wiring between the parts to see which part is causing the issue. We hope this helps with the repair!

$75.13

Temperature Sensor

$192.87

PCB ASSEMBLY,MAIN

$104.33

HEATER,SHEATH

$114.47

HEATER,SHEATH

Was this helpful?

Common Symptoms of the LSE4616ST

How this model fails, and the parts that fix it.

Little to no heat when baking

Fixed by
these parts

Show All

Oven not heating evenly

Element will not heat

Door won’t open after self cleaning cycle

Gas igniter glows, but will not light

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Convection Fan stopped working, would spin but not continuously on its own

16 of 24 people found this instruction helpful.

Barry from PIERRE, SD
A Bit Difficult
30 - 60 mins
Nutdriver, Screw drivers

Unplugged oven electric and turned gas off. Removed all back covers from the unit. Removed the cover on the inside covering the burner and fan in the back of the convection oven. Removed the nut securing the fan to motor shaft with helper holding the motor. Removed the three electrical wires attached to motor, making note where they go. ... Read more

Read less

Was this helpful?

Replace Inner Oven glass because it shattered

18 of 41 people found this instruction helpful.

Jeffrey from CERRITOS, CA
Really Easy
30 - 60 mins
Screw drivers

Go onto youtube, such as https://www.youtube.com/watch?v=-ITkrwhDNMQ and watch similar videos for DYI. The process is very similar to other models.

Once the door is removed, place oven door on a towel or soft place so it does not scratch the door. Unscrew the screws and make sure you notice where each screw goes, so you know ... Read more

Read less

Was this helpful?

the oven knob was not working to select the desire operation

4 of 5 people found this instruction helpful.

Roy from MARBLE FALLS, TX
Really Easy
30 - 60 mins
Screw drivers

Took off the front panel of the range and found the circuit board that operated the Oven knob selections and took it off got the part number and order it. Then just replaced it as the reverse of taking it off . The oven knob work to the desire selections on the range .

Was this helpful?