LS27-24BF572B711 ((1H240H40027-UP)(2010)) Troy-Bilt Log Splitter - Overview

This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your...Read more owners manual to determine the exact location. While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations. Customers rate this repair as Easy.

This authentic OEM air filter assembly includes a pleated paper air filter and a foam pre-filter. It is located in the air cleaner housing of your lawn equipment. Its purpose is to filter out dust and debris, ensuring that the engine receives clean air for efficient fuel combustion. If your filter is clogged or torn, it is necessary to re...Read moreplace it. A clogged or damaged filter can cause difficulties when starting your machine. It can also lead to increased fuel consumption, costly repairs, and potential engine failure. To replace the filter, locate the air cleaner housing, remove the cover by pressing the push tab and lifting it up, then take off the air filter from its base. This assembly is sold individually.

This Cotter Pin is a silver 5/32x1-1/4 metal part, sold individually and certified by the original equipment manufacturer. It connects to the axel shaft after the wheel and washer have been installed but before the hub cap. It is used to prevent the wheel from falling off, and if it breaks (due to fatigue) the wheel will fall off. Check...Read more your model number for the correct size of replacement cotter pin to know you are ordering the correct model. This is a one-time use product, which should be replaced during any other repair in which it is disturbed or dislodged.

The screw attaches to the flexible coupling and is made of metal. This is an original Troy-Bilt and MTD part for use in lawn mowers and log splitters. This item is available as an individual replacement. An allen wrench will be required to replace this part. It will need to be replaced if it becomes stripped or broken.

This OEM Cone Bearing, also known as a Tapered Bearing, is a silver, .75 I.D., metal part. Sold individually, it attaches inside the wheel hub, and customers have rated the installation as Medium Difficulty. It is recommended to pack the bearing before installation. This part reduces friction on a moving part, inside of a stationary par...Read moret. When it breaks, you will hear a grinding, growling or squealing sound. It must be replaced when worn or damaged (such as if there are scores on the rollers or on the mandrel).

The self tapping screw attaches to the engine. It is made of metal and is sold individually. This is an OEM part sourced directly from the manufacturer and used in lawn tractors made by Troy-Bilt, MTD, Yard Machines, Bolens, and Yard Man. You may need a wrench when replacing this part. It will require replacing if it strips or breaks.

An authentic replacement component which is supplied directly from the original equipment manufacturer for use with Troy-Bilt and MTD log splitters. This is the flexible coupling which is attached to the gear pump, please make sure to check appropriate diagrams of your model for the correct location and use of this item. Over time the par...Read moret may wear out and begin to fail eventually requiring replacement to maintain peak performance. It is a high-quality component which is made of durable metal and it is sold individually.