LRSOS2706S (00) LG Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Very tight fit, almost gave up.
Refrigerator door needs to be open all the way and still you have to squeeze to glass shelf in to place. It needs to go in straight and make sure the placement is correct. It may seem like it doesn't fit but it does, it is very, very tight.
Parts Used:
-
Alberto from KING CITY, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:Less than 15 mins
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice tray froze in place and motor broke tray and gear in motor
shut off ice maker in door and removed bin and top cover, removed two bottom screws and middle screws and loosened top screw and assembly pulls uot from the bottom and unplug the unit. After the new ice maker unit is installed turn on the ice maker to highest setting for 24 hours and throw the ice away. then reset for maxium ice making for the next 24 hours and you have a bin full of new ice
Parts Used:
-
Thomas from Seaford, DE
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken lower glass shelf and basket assembly
Remove old shelf and basket first. Remove shelf in door, to give you more room. Carefully slide you glass shelf in. Go slow and be patient, it's very tight. I was nervous it was going to break putting it in. Must go at it straight and level. Install basket below into track, very simple. The shelf fits but extremely tight!
Parts Used:
-
Karla from OMAHA, NE
-
Difficulty Level:Difficult
-
Total Repair Time:30 - 60 mins
1 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!